Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

Scotch-Brite™ Light Deburring Wheel, 14 in x 1 in x 8 in 8S FIN, 1 per case

3M ID  61500126554    UPC#  00048011016948     
Scotch-Brite(TM) EXL Deburring Wheel, 2 in Center Hole Dia
Scotch-Brite(TM) EXL Deburring Wheel, 2 in Center Hole Dia
Scotch-Brite™ Light Deburring Wheel is a smooth running, convolute-constructed wheel that provides a clean system for light deburring, polishing, and finishing. We made this wheel with soft construction and smooth operation to require less effort by the operator than a harder wheel.
Need Help?

Questions? We can help

Contact Us



Our Scotch-Brite™ Light Deburring Wheel is uniquely suited to applications where a moderate degree of conformability and density are needed to maintain critical tolerances while providing a fine polished finish. A unique resin system helps minimize smearing and reduces heat build-up. The Light Deburring Wheel runs cool and resists loading due to its non-woven web construction. We did this to reduce the risk of part discoloration and warping while extending the life of the wheel. The Light Deburring Wheel is available in fine grade abrasive.

Our Scotch-Brite™ Light Deburring Wheel uses fine grade silicon carbide abrasive. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish.

Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We made this wheel with an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.


 Application Category‎ Finishing/Polishing‎ ,  Blending/Deburring‎
 Applications‎ Deburring‎ ,  Finishing‎ ,  Deburring Edges‎
 Brand‎ Scotch-Brite™‎
 Center Hole Diameter‎ 8 Inch‎
 Center Hole Diameter (Metric)‎ 203.2 mm‎
 Color‎ Gray‎
 Converted Form‎ Wheel‎
 Density‎ 8‎
 Diameter‎ 14 Inch‎
 Diameter (Metric)‎ 355.6 mm‎
 Equipment - Machines‎ Robotics‎ ,  Backstand‎ ,  Centerless Grinders‎
 Form Type‎ Convolute/Deburring‎
 Grade‎ FIN‎
 Industries‎ Marine‎ ,  Metalworking‎
 Max RPM‎ 2550‎
 Mineral Type‎ Silicon Carbide‎
 Position‎ Good‎
 Primary Application‎ Metalworking‎
 Product Form‎ Wheel‎
 Sub Industries‎ Turbine Engines‎ ,  Metal Implants‎ ,  Plumbing Fixtures‎ ,  Builders Hardware‎ ,  Medical Instruments‎ ,  Metal Fabrication‎
 Substrates‎ All Metals‎
 Width‎ 1 Inch‎
 Width (Metric)‎ 25.4 mm‎