Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

Scotch-Brite™ Clean and Strip Unitized Wheel, 6 in x 1 in x 1 1/4 in 7S XCS, 2 per case

3M ID  61500100112    UPC#  00048011172354     
Scotch-Brite(TM) Clean and Strip Unitized Wheel, 4-8 in, 7S XCS
Scotch-Brite(TM) Clean and Strip Unitized Wheel, 4-8 in, 7S XCS
Scotch-Brite™ Clean and Strip Unitized Wheel is hard, open-web wheel for aggressive coating removal, cleaning welds, and removing rust, paint, and coating. The layered, durable unitized wheel construction and hard 7 density, with low conformability, works well with portable tools and die grinders to reach tight or confined areas.
  • More effective, smoother running, and safer for coating and corrosion removal than wire wheels and cups
  • Extra coarse abrasive and low conformability provide strong cutting action without damaging the base material
  • Gets into hard-to-reach areas
  • Tough, layered, unitized construction can operate clockwise or counterclockwise directions
  • Resists heat buildup and loading on soft coatings, allowing prolonged operation and consistent coating-removal over the life of the product
Need Help?

Questions? We can help

Contact Us

 

Overview

The extra coarse silicon carbide mineral combined with a tough synthetic web effectively removes scale, rust, surface contaminants, paints and coatings. Our wheel is also well suited for removing weld discoloration and splatter. The dense, open-web construction and aggressive properties produce a wheel that runs smoothly and that resists loading, even when removing soft coatings. Abrasive mineral: Extra coarse grade silicon carbide.

The Scotch-Brite™ Clean and Strip Unitized Wheel is filled with silicon carbide abrasive mineral, a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish.

Our Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We have chosen an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

Specifications

Application CategoryAdhesives, Coatings, Sealant Corrosion Removal, Cleaning
ApplicationsSlab Cleaning, Coating Removal, Paint Stripping, Chrome Stripping, Rust Removal, Cleaning
BrandScotch-Brite™
Center Hole Diameter1.25 Inch
Center Hole Diameter (Metric)31.75 mm
ColorBlack
Converted FormWheel
Density7
Diameter6 Inch
Diameter (Metric)152.4 mm
Equipment - MachinesBench Motors
Form TypeUnitized
GradeXCS
IndustriesMetalworking
Max RPM7000
Mineral TypeSilicon Carbide
PositionBetter
Primary ApplicationMetalworking, Paint Prep, Coating & Corrosion Removal
Product FormWheel
Sub IndustriesTurbine Engines, Metal Implants, Plumbing Fixtures, Builders Hardware, Medical Instruments, Metal Fabrication
SubstratesAll Metals
Width1 Inch
Width (Metric)25.4 mm