Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Urethane Foam Tape 4314 Charcoal Gray, 1 in x 18 yd 250.0 mil, 9 per case

3M ID  70006095759    UPC#  00051131064430    3M Product Number  4314     
3M SC Urethan Foam Tape 4314
3M SC Urethan Foam Tape 4314
3M(TM) Urethene Foam Tape 4318
3M™ Urethane Foam Tape 4314 is a conformable, low-density, open-cell foam tape with a pressure sensitive acrylic adhesive on one side. This tape will adhere to a variety of substrates and can be used in numerous mounting applications to dampen sound and create a clean and durable product.
  • Charcoal gray, 0.250 in. (6.4 mm) soft conformable, low-density, open-cell foam design helps seal out air, dust and light when compressed
  • Excellent cushioning characteristics and high absorbency
  • Dampens sounds and absorbs vibration when used in electronic applications
  • Offers high initial quick-stick to multiple substrates
  • Provides excellent shear strength and high temperature performance
Need Help?

Questions? We can help

Contact Us

 

Overview

3M™ Urethane Foam Tape 4314 is 1/4 in. thick, comprised of a soft conformable, low-density, open-cell foam with a pressure sensitive acrylic adhesive on one side.
When compressed 50%, the open cell construction of 3M Urethane Foam Tape 4314 provides an air barrier and cushion in electronic equipment
Seals Out Moisture, Dust and Drafts
3M™ Urethane Foam Tape 4314 is 1/4 in. thick, comprised of a soft conformable, low-density, open-cell foam with a pressure sensitive acrylic adhesive on one side. The adhesive is protected by a silicone treated paper liner. It offers excellent cushioning characteristics while providing high absorbency to seal out moisture, dust and drafts. It can perform under a wide range of temperatures. Special note: Extra care should be taken when handling to avoid damaging tape.

Recommended Applications
  • Cushion and dampen sound in electronics such as printers, keyboards, computers, aircraft lights and automotive dashboards
  • Register covers
  • Recessed lighting
  • Door, window and cabinet seals
Excellent Shear Holding Strength with 3M™ Adhesive 430
3M™ Urethane Foam Tape 4314 features 3M™ Adhesive 430. This pressure sensitive, modified acrylic adhesive provides high initial quick-stick to a variety of surfaces and substrates. It has an excellent chemical resistant and shear holding strength, even at elevated temperatures. Adhesive 430 is designed to perform at temperatures up to 180°F (82°C) in the short term and 150°F (70°C) long term.

Protect Sensitive Components
The adhesion of 3M™ Single-Coated Foam Tapes is typically satisfactory within 20 minutes and continues to build with additional time. The adhesive is protected by a thick, silicone treated paper liner and has a firm, high-density foam. This design offers an attractive and clean appearance after application.

What is Open Cell Foam?
Open cell foams are commonly used between component panels where a degree of separation is needed to dampen or prevent vibration, as a thermal insulation barrier and to protect against contamination, but where a measure of airflow is still necessary, such as with electronic components where air flow helps keeps components cool.

Attributes

 Adhesive Type‎‎ Acrylic
 Brand‎‎ 3M
 Carrier Material‎‎ Urethane
 Color‎‎ Charcoal Gray
 Consumer Label‎‎ No
 Density‎‎ 2 Pound Per Cubic Foot
 Industries‎‎ Transportation,‎ Specialty Vehicle,‎ Automotive,‎ General Industrial,‎ Appliance
 Length‎‎ 18 Linear Yard
 Length (Metric)‎‎ 16.45 m
 Maximum Operating Temperature (Fahrenheit)‎‎ 150 Degree Fahrenheit
 Primary Liner‎‎ Paper
 Primary Liner Color‎‎ Tan
 Product Form‎‎ Roll
 Shelf Life in Months (from date of manufacture)‎‎ 18
 Temperature Resistance - Initial‎‎ 250 Degree Fahrenheit
 Thickness‎‎ 250 mil
 Thickness (Metric)‎‎ 6.3 mm
 Width‎‎ 1 Inch
 Width (Metric)‎‎ 25.4 mm

Documents

Application Guide