Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Off-White, 35 mL, 12 per case

3M ID  62278304308    UPC#  00021200491108    Part Number  DP8010    3M Product Number  DP8010     
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 White
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 White
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 is a two-part acrylic-based adhesive. 10:1 mix ratio, 10 minute work life and handling strength in approximately 2 hours. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required (not included).
  • 10 minute work life
  • Structurally bonds polyolefins without surface preparation
  • Medium viscosity
  • General industrial, metal working, maintenence, repair, construction equipment, agricultural equipment, plastic and rubber industry, medical, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace.
  • Bonding, gluing, joining, attaching, assembling, encapsulating, potting and sealing.
Need Help?

Questions? We can help

Contact Us

 
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 bonds many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPE`s) without special surface preparation.

Specifications

BrandScotch-Weld
Chemical BaseAcrylic
ColorOff-White
Consumer LabelNo
Container Volume35 ml
Full Cure8-24 Hours @ 72 F (22 C)
Hardness45-50 Shore D
IndustriesMedical, General Industrial, Construction, Electronics, Specialty Vehicle, MRO, Metalworking, Transportation, Consumer Goods, Military & Government
Mix Ratio Volume Base:Accelerator10 : 1
Peel Strength at 72 Degrees F (22 Degrees C)17 lb/in
Physical FormFlowable Liquid
Product FormEach
Shear Strength at 72 Degrees F (22 Degrees C)2400 Pound-Force Per Square Inch
Shelf Life6 months
Specific Gravity1.01
Storage Temperature<=40 Degree Fahrenheit
Substrate 1Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Plastics (High Performance Nylon), Wood & Hardboard
Substrate 2Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Plastics (High Performance Nylon), Wood & Hardboard
Time to Handling Strength2 Hour
TypeStructural Plastic Adhesive
Viscosity Range (cps) at Room Temperature20,000
Worklife10 minutes @ 72 F (22 C)