Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M(TM) Scotch-Weld(TM) Structural Plastic Adhesive DP8010NS Off-White, 35 mL, 12 per case, Obsolete

3M ID  62279804306    UPC#  00021200963094     
3M(TM) Scotch-Weld(TM) Structural Plastic Adhesive DP8010NS
3M(TM) Scotch-Weld(TM) Structural Plastic Adhesive DP8010NS
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS is a non-sag, two-part acrylic-based adhesive. 10:1 mix ratio, 10 minute work life and handling strength in approximately 2 hours. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required (not included).
  • 10 minute work life
  • Structurally bonds polyolefins without surface preparation
  • Non-Sag formulation
  • General industrial, metal working, maintenence, repair, construction equipment, agricultural equipment, plastic and rubber industry, medical, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace.
  • Bonding, gluing, joining, attaching, assembling, encapsulating, potting and sealing.
Need Help?

Questions? We can help

Contact Us

 

Overview

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS bonds many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPE`s) without special surface preparation.

Attributes

 Adhesive Type‎‎ Acrylic
 Brand‎‎ Scotch-Weld
 Color‎‎ Off-White
 Consumer Label‎‎ No
 Container Volume‎‎ 35 ml
 Full Cure‎‎ 8-24 Hours @ 72 F (22 C)
 Hardness‎‎ 60 Shore D
 Industries‎‎ Transportation,‎ Specialty Vehicle,‎ Metalworking,‎ Construction,‎ Medical,‎ Military & Government,‎ General Industrial,‎ MRO,‎ Electronics,‎ Consumer Goods
 Mix Ratio Volume Base:Accelerator‎‎ 10 : 1
 Peel Strength at 72 Degrees F (22 Degrees C)‎‎ 17 lb/in
 Physical Form‎‎ Flowable Liquid
 Product Form‎‎ Each
 Shear Strength at 72 Degrees F (22 Degrees C)‎‎ 2400 Pound-Force Per Square Inch
 Shelf Life in Months (from date of manufacture)‎‎ 6
 Specific Gravity‎‎ 1.04
 Storage Temperature‎‎ <=40 Degree Fahrenheit
 Substrate 1‎‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Glass & Ceramics,‎ Wood & Hardboard
 Substrate 2‎‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Glass & Ceramics,‎ Wood & Hardboard
 Time to Handling Strength‎‎ 2 Hour
 Type‎‎ Structural Plastic Adhesive
 Viscosity Range (cps) at Room Temperature‎‎ 65,000
 Worklife‎‎ 10 minutes @ 72 F (22 C)