Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010

3M Product Number  DP8010     
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 is a two-part acrylic-based adhesive. 10:1 mix ratio, 10 minute work life and handling strength in approximately 2 hours. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required (not included).
  • 10 minute work life
  • Structurally bonds polyolefins without surface preparation
  • Medium viscosity
Need Help?

Questions? We can help

Contact Us

 

Product Resultsvar modelsTxt="Product Results";

Narrow by:

Container Volume

Products and Purchase Options: 

5 Results (Displaying results 1-5)
1
3M IDUPCMarketplace Formal NameColorContainer Volume
62279804306000212009630943M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS Off-White, 35 mL, 12 per caseOff-White35 ml  
62280839309000511156481513M™ Scotch-Weld™ Structural Plastic Adhesive DP8010FC Blue, 250 mL, 12 per case Duo-PakBlue250 ml  
62278339304000212004911153M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Off-White, 250 mL, 12 per caseOff-White250 ml  
62278304308000212004911083M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Off-White, 35 mL, 12 per caseOff-White35 ml  
62279839302000212009631003M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS Off-White, 250 mL, 12 per caseOff-White250 ml  
5 Results (Displaying results 1-5)
1
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 bonds many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPE`s) without special surface preparation.

Specifications

BrandScotch-Weld
Chemical BaseAcrylic
ColorBlue, Off-White
Consumer LabelNo
Container Volume35 ml, 250 ml
Full Cure8-24 Hours @ 72 F (22 C)
Hardness60 Shore D, 45-50 Shore D
IndustriesTransportation, Specialty Vehicle, Metalworking, Construction, Medical, Military & Government, General Industrial, MRO, Electronics, Consumer Goods
Mix Ratio Volume Base:Accelerator10 : 1
Peel Strength at 72 Degrees F (22 Degrees C)17 lb/in
Physical FormFlowable Liquid
Product FormEach
Shear Strength at 72 Degrees F (22 Degrees C)2400 Pound-Force Per Square Inch
Shelf Life6 months
Specific Gravity1.04, 1.01
Storage Temperature<=40 Degree Fahrenheit
Substrate 1Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard
Substrate 2Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard
Time to Handling Strength2 Hour
TypeStructural Plastic Adhesive
Viscosity Range (cps) at Room Temperature20,000, 65,000
Worklife10 minutes @ 72 F (22 C)