Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 Translucent, 35 mL, 12 per case

3M ID  62278604376    UPC#  00051111921302    Part Number  DP8005    3M Product Number  DP8005     
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 is a two-part acylic-based adhesive. 10:1 mix ratio, 3 minute work life and handling strength in approximately 3 hours. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required (not included).
  • 3 minute work life
  • Structurally bonds polyolefins without surface treatment
  • Medium viscosity
  • General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace
  • Bonding, gluing, joining, attaching, assembling, encapsulating, potting and sealing.
Need Help?

Questions? We can help

Contact Us

 
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 can bond many low surface energy plastics, including many grades of Polypropylene, Polyethylene, and Thermoplastic Elastomers (TPE`s) without special surface preparation.

Specifications

ApplicationsShroud Attachment
BrandScotch-Weld
Chemical BaseAcrylic
ColorTranslucent
Consumer LabelNo
Container Volume35 ml
Full Cure8-24 Hours @ 72 F (22 C)
Hardness60 Shore D
IndustriesTransportation, Specialty Vehicle, Construction, Automotive, Military & Government, General Industrial, Electronics, Consumer Goods
Mix Ratio Volume Base:Accelerator10 : 1
Peel Strength at 72 Degrees F (22 Degrees C)17 lb/in
Physical FormFlowable Liquid
Product FormEach
Shear Strength at 72 Degrees F (22 Degrees C)2400 Pound-Force Per Square Inch
Shelf Life6 months
Specific Gravity0.99
Storage Temperature40 Degree Fahrenheit
Substrate 1Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard
Substrate 2Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard
Time to Handling Strength3 Hour
TypeStructural Plastic Adhesive
Viscosity Range (cps) at Room Temperature25,000
Worklife3 minutes @ 72 F (22 C)