Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 Translucent, 250 mL, 12 per case

3M ID  62278639364    UPC#  00051111921319    Part Number  DP8005    3M Product Number  DP8005     
3M(TM) Scotch-Weld(TM) Structural Plastic Adhesive DP8005
3M(TM) Scotch-Weld(TM) Structural Plastic Adhesive DP8005
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 is a two-part acylic-based adhesive. 10:1 mix ratio, 3 minute work life and handling strength in approximately 3 hours. 3M™ EPX™ 200,250,400 mL manual applicator and mix nozzles are required (not included).
  • 3 minute work life
  • Structurally bonds polyolefins without surface treatment
  • Medium viscosity
  • General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace
  • Bonding, gluing, joining, attaching, assembling, encapsulating, potting and sealing.
Need Help?

Questions? We can help

Contact Us

 
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 can bond many low surface energy plastics, including many grades of Polypropylene, Polyethylene, and Thermoplastic Elastomers (TPE`s) without special surface preparation.

Specifications

Adhesive TypeAcrylic
ApplicationsShroud Attachment
BrandScotch-Weld
ColorTranslucent
Consumer LabelNo
Container Volume250 ml
Full Cure8-24 Hours @ 72 F (22 C)
Hardness60 Shore D
IndustriesTransportation, Specialty Vehicle, Construction, Automotive, Military & Government, General Industrial, Electronics, Consumer Goods
Mix Ratio Volume Base:Accelerator10 : 1
Peel Strength at 72 Degrees F (22 Degrees C)17 lb/in
Physical FormFlowable Liquid
Product FormEach
Shear Strength at 72 Degrees F (22 Degrees C)2400 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)6
Specific Gravity0.99
Storage Temperature40 Degree Fahrenheit
Substrate 1Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard
Substrate 2Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard
Time to Handling Strength3 Hour
TypeStructural Plastic Adhesive
Viscosity Range (cps) at Room Temperature25,000
Worklife3 minutes @ 72 F (22 C)