Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Structural Plastic Adhesive 8010 Blue Part A, 1 Gallon, 1 per case

3M ID  62288375306    UPC#  00021200491139    3M Product Number  8010     
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.
  • Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
  • Resists many chemicals, water, humidity and corrosion
  • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
  • Medium viscosity allows controlled dispensing
  • 10 minute work life with 60 minute handling strength
  • Strong adhesive can replace screws, rivets and welding
Need Help?

Questions? We can help

Contact Us

 

Overview

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue
Available in a range of sizes to meet application requirements
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Creates a Strong Bond on Low Surface Energy Plastics
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue also bonds metals, ceramics, and wood and most other plastics. It is slightly flexible when cured. We also formulate this adhesive with 8 mil spacer beads for bond line spacing.

Recommended Applications
  • Joining plastics to metals, such as in the manufacture or repair of appliances
  • Bonding low surface energy plastics without priming
  • Impact resistance composite bonding
  • Manufacture or repair of various sporting goods equipment
  • Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)
Our 3M™ Scotch-Weld™ Acrylic Adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F /22° C).

Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.

Attributes

 Adhesive Type‎‎ Acrylic
 Brand‎‎ Scotch-Weld
 Color‎‎ Colorless
 Consumer Label‎‎ No
 Full Cure‎‎ 8-24 Hours @ 72 F (22 C)
 Hardness‎‎ 55-60 Shore D
 Industries‎‎ Transportation,‎ Specialty Vehicle,‎ Construction,‎ Military & Government,‎ General Industrial,‎ Electronics,‎ Consumer Goods
 Mix Ratio Volume Base:Accelerator‎‎ 10 : 1
 Open Time‎‎ 10 minutes @ 72 F (22 C)
 Physical Form‎‎ Flowable Liquid
 Product Form‎‎ Gallon
 Product Type‎‎ Structural Plastic Adhesive
 Set Time‎‎ 1 Hour
 Shear Strength at 72 Degrees F (22 Degrees C)‎‎ 2700 Pound-Force Per Square Inch
 Shelf Life in Months (from date of manufacture)‎‎ 6
 Specific Gravity‎‎ 1.02
 Storage Temperature‎‎ <=40 Degree Fahrenheit
 Substrate 1‎‎ Polypropylene,‎ Plastic, Hard-to-Bond (LSE),‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Painted Surface, Hard-to-Bond (LSE)
 Substrate 2‎‎ Polypropylene,‎ Plastic, Hard-to-Bond (LSE),‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Painted Surface, Hard-to-Bond (LSE)
 Substrates‎‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Glass & Ceramics,‎ Wood & Hardboard
 Viscosity Range (cps) at Room Temperature‎‎ 27,000
 Volume‎‎ 1 gal