Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Structural Plastic Adhesive 8005 Black Part A, 1 Gallon, 1 per case

3M ID  62287975304    UPC#  00021200451713    3M Product Number  8005     
Scotch-Weld DP-8005 Family
Scotch-Weld DP-8005 Family
3M™ Scotch-Weld™ Structural Plastic Adhesive 8005 is one of our 10:1 ratio, two-part acrylic based adhesive specially formulated to bond many low surface energy plastics. It will adhere many grades of polypropylene, polyethylene, and thermoplastic Elastomers (TPE`s) without special surface preparation.
  • Ability to structural bond low surface energy plastics such as polyolefins, polypropylene, polyethylene and TPO's
  • Excellent resistance to water and humidity combined with very good chemical resistance results in a bond that can withstand a variety of applications and conditions
  • Cures at room temperature without heat or other chemicals to eliminate complex adhesion processes
  • One step process results in a strong bond on low surface energy plastics minimizing or eliminating pre-treatment or preparation of the substrates needed prior to bonding
  • Solvent-free adhesive system
Need Help?

Questions? We can help

Contact Us

 

Overview

No Prep Adhesion
Our 3M™ Scotch-Weld™ Structural Plastic Adhesive 8005 was designed to handle adhesion problems typically associated with the bonding of low surface energy plastics. In addition to various plastics, it will also bond a variety of other dissimilar substrates ranging from metals, rubber, glass, ceramics and wood in a one-step process with minimal or no surface preparation. However, all substrates should be clean, dry and free of paint, oxide films, oils, dust, mold release agents and other surface contaminants.

Bond Quickly with Confidence
This adhesive is a medium viscosity structural adhesive with good control and spread to sufficiently wet out the surface when applied. With a 10:1 mix ratio it provides a 3 minute work life. Handling strength is reached in approximately 3 hours and the adhesive will fully cure in 24 hours at room temperature (72°F /22°C.) Once bonded this adhesive features excellent water and humidity resistance while maintaining very good chemical resistance. It is an effective system for joining, potting and structural bonding, and can replace screws, rivets, plastic welding and two-step processes which include chemical etchants, priming or surface treatments in many applications.

Recommended Applications

  • Joining plastics to metals, such as in the manufacture or repair of appliances
  • Bonding low surface energy plastics without priming
  • Impact resistance composite bonding
  • Manufacture or repair of various sporting goods equipment
  • Low surface energy plastics such as polypropylene, polyethylene and thermosplastic elastomers (TPE's

Adhere with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability, although slightly lower than epoxy adhesives. However, they have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf.

Attributes

 Adhesion Strength‎‎ 270 oz/in
 Adhesive Type‎‎ Acrylic
 Applications‎‎ Bonding
 Brand‎‎ Scotch-Weld
 Color‎‎ Black
 Consumer Label‎‎ No
 Full Cure‎‎ 8-24 Hours @ 72 F (22 C)
 Hardness‎‎ 55-60 Shore D
 Industries‎‎ Transportation,‎ Specialty Vehicle,‎ Construction,‎ Military & Government,‎ General Industrial,‎ Electronics,‎ Consumer Goods
 Mix Ratio Volume Base:Accelerator‎‎ 10 : 1
 Open Time‎‎ 3 minutes @ 72 F (22 C)
 Physical Form‎‎ Flowable Liquid
 Product Form‎‎ Gallon
 Product Type‎‎ Structural Plastic Adhesive
 Shear Strength at 72 Degrees F (22 Degrees C)‎‎ 2200 Pound-Force Per Square Inch
 Shelf Life in Months (from date of manufacture)‎‎ 6
 Specific Gravity‎‎ 0.98
 Storage Temperature‎‎ 40 Degree Fahrenheit
 Substrate 1‎‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Glass & Ceramics,‎ Wood & Hardboard
 Substrate 2‎‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Glass & Ceramics,‎ Wood & Hardboard
 Substrates‎‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Glass & Ceramics,‎ Wood & Hardboard
 Viscosity Range (cps) at Room Temperature‎‎ 35,000-55,000
 Volume‎‎ 1 gal