Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Structural Plastic Adhesive 8005

3M Product Number  8005     
3M™ Scotch-Weld™ Structural Plastic Adhesive 8005 is a two-part acrylic based adhesive. 10:1 mix ratio, 3 minute work life and handing strength in approximately 3 hours. This product is part of a B/A system.
  • 3 minute work life
  • Structurally bonds polyolefins without surface treatment
  • Medium viscosity
Need Help?

Questions? We can help

Contact Us

 

Product Resultsvar modelsTxt="Product Results";

Products and Purchase Options: 

7 Results (Displaying results 1-7)
1
3M IDUPCMarketplace Formal NameColorContainer Volume
62287975304000212004517133M™ Scotch-Weld™ Structural Plastic Adhesive 8005 Black Part A, 1 Gallon, 1 per caseBlack1 Gallon  
62277985362000511119216853M™ Scotch-Weld™ Structural Plastic Adhesive 8005 Black Part B, 5 Gallon, 1 per caseBlack5 Gallon  
62287985303000212004517203M™ Scotch-Weld™ Structural Plastic Adhesive 8005 Black Part A, 5 Gallon, 1 per caseBlack5 Gallon  
62277995361000511119217153M™ Scotch-Weld™ Structural Plastic Adhesive 8005 Black Part B, 50 Gallon, 1 per caseBlack50 Gallon  
62288675309000212004155243M™ Scotch-Weld™ Structural Plastic Adhesive 8005 White Part A, 1 Gallon, 1 per caseWhite1 Gallon  
62327085361000511119217533M™ Scotch-Weld™ Structural Plastic Adhesive 8005 BF Off-White Part B, 5 Gallon, 1 per caseOff-White  
62278685367000511119214323M™ Scotch-Weld™ Structural Plastic Adhesive 8005 Translucent Part B, 5 Gallon, 1 per caseTranslucent5 Gallon  
7 Results (Displaying results 1-7)
1
3M™ Scotch-Weld™ Structural Plastic Adhesive 8005 can bond many low surface energy plastics, including many grades of Polypropylene, Polyethylene, and Thermoplastic Elastomers (TPE`s) without special surface preparation.

Specifications

Adhesive TypeAcrylic
BrandScotch-Weld
ColorWhite, Black, Translucent, Off-White
Consumer LabelNo
Container Volume5 Gallon, 1 Gallon, 50 Gallon
Full Cure8-24 Hours @ 72 F (22 C)
Hardness60 Shore D
IndustriesTransportation, Specialty Vehicle, Construction, Military & Government, General Industrial, Electronics, Consumer Goods
Mix Ratio Volume Base:Accelerator10 : 1
Peel Strength at 72 Degrees F (22 Degrees C)17 lb/in
Physical FormFlowable Liquid
Product FormGallon, Each
Shear Strength at 72 Degrees F (22 Degrees C)2400 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)6
Specific Gravity0.98
Storage Temperature40 Degree Fahrenheit
Substrate 1Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard
Substrate 2Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard
Time to Handling Strength3 Hour
TypeStructural Plastic Adhesive
Viscosity Range (cps) at Room Temperature15,000-30,000
Worklife2.5-3 minutes @ 72 F (22 C), 3 minutes @ 72 F (22 C)