Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 Tan, 400 mL, 6 per case

3M ID  62329835300    UPC#  00021200313127    3M Product Number  810     
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 Tan Duo-Pak
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 Tan Duo-Pak
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 Tan, 50 mL
Scotch-Weld(TM) Structural Strength Acrylic Adhesive DP-810
Scotch-Weld Adhesives Two parts
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is a toughened two-part, room-temperature curing acrylic adhesive specially formulated to bond oily metals, plastics, and other surfaces. With lower odor and non-flammable properties, 3M™ Scotch-Weld™ Acrylic Adhesive DP810 contributes to a safer work environment compared to typical acrylic adhesives.
  • Low odor adhesive is ideal for any setting where harsh fumes or flammability are an issue
  • Provides high shear and peel strength and is toughened for impact resistance
  • 10 minute work life and 20 minute handling strength
  • Bonds oily metals with minimal surface prep
  • Bonds most plastics, composites and metals
Need Help?

Questions? We can help

Contact Us

 

Overview

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Provides High Shear and Peel Strength and is Toughened for Impact Resistance
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end-use applications. Making work safer, faster, and more efficient, that's just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color.

Recommended Applications

  • Sporting goods (metal to metal, metal to plastic bonding)
  • Appliance manufacturing (metal to metal, metal to glass)
  • Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is approved under UL 746C, polymeric materials use in electrical equipment.

Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

Attributes

 Adhesion Strength‎‎ 480 oz/in
 Adhesive Type‎‎ Acrylic
 Brand‎‎ Scotch-Weld
 Color‎‎ Tan
 Consumer Label‎‎ No
 Full_Cure‎‎ 8-24 Hours @ 72 F (22 C)
 Industries‎‎ Transportation,‎ Specialty Vehicle,‎ Metalworking,‎ Construction,‎ Military & Government,‎ General Industrial,‎ Electronics,‎ Consumer Goods
 Mix_Ratio_Volume_Base_Accelerator‎‎ 1 : 1
 Open_Time‎‎ 10 minutes @ 72 F (22 C)
 Physical_Form‎‎ Flowable Liquid
 Product Form‎‎ Each
 Product Type‎‎ Acrylic Adhesive
 Set Time‎‎ 10 Minute
 Shear_Strength_at_72_Degrees_F_22_Degrees_C‎‎ 3600 Pound-Force Per Square Inch
 Shelf Life in Months (from date of manufacture)‎‎ 12
 Specific Gravity‎‎ 1.07
 Storage_Temperature‎‎ <=40 Degree Fahrenheit
 Substrate_1‎‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard
 Substrate_2‎‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard
 Substrates‎‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard
 Viscosity_Range_cps_at_Room_Temperature‎‎ 20,000
 Volume (metric)‎‎ 400 ml