Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ Sprayable Hot Melt Adhesive 6111 B Tan, .75 in x .75 in, 22 lb per case Bulk

3M ID  62611193350    UPC#  00021200965890    3M Product Number  6111     
Spray-Bond Colors
Spray-Bond Colors
The 3M™ Sprayable Hot Melt Adhesive 6111 is a 100% solids, medium to high temperature resistant adhesive that is used to effectively bond most foams, fabrics, particle board and thin metal. The sprayable thermoplastic adhesive offers easy, quick and accurate application to keep jobs running smoothly.
  • Immediate initial strength to increase job speed
  • Medium to high temperature resistance
  • One or two surface application increases bonding range
  • Bonds to a variety of surfaces – foams, plastics, particle board, light gauge metals
  • Sprayable thermoplastic adhesive has easy, quick and accurate application
Need Help?

Questions? We can help

Contact Us



Our 3M™ Sprayable Hot Melt Adhesive 6111 is a heat applied, 100% solids, sprayable adhesive for a fast and neat alternative to aerosols, contact adhesives and solvent-based adhesives; it bonds to a variety of surfaces to increase the number of jobs it can be used for.

Recommended Applications

  • Foams
  • Plastics
  • Particle board
  • Light gauge metals

Easy and Accurate Application
Some adhesives require inordinate prep time with a limited range of uses. Our 3M™ Sprayable Hot Melt Adhesive 6111 meets the needs of the consumer by delivering an application method that gets the job done right. 3M™ Sprayable Hot Melt Adhesive 6111 is ideal for large surface lamination assemblies, such as laminates to table tops, fabric to foam and veneers to furniture and flooring. By simply adding heat, the user can enjoy a strong adhesive that is easily, quickly and accurately applied to one or two surfaces. Once applied, the adhesive cools to form a long lasting bond.

As an added bonus, the adhesion is virtually immediate, with an open time of 1-6 minutes depending upon the surface. The spray adhesive not only shortens the time it takes to complete jobs, it also gives the user a controlled method to apply adhesive with minimal overspray.

What Are Hot Melt Adhesives?
Hot melts are 100% solids thermoplastic resins. These adhesives are engineered to re-melt after bonding if exposed to high enough temperatures. The main advantage of hot melt adhesives is that, unlike mechanical fasteners and sealing tapes, they are virtually invisible between surfaces.

Our hot melt adhesives liquefy when heated, quickly fill gaps and wet the bonding surface. When they are applied to a surface, they cool, harden and reach their bond strength within seconds. Due to their quick work-life, you can move assemblies immediately upon application which eliminates the need for clamps, fixturing or additional drying time and energy.


 Adhesive Type‎‎ Polypropylene
 Application Method‎‎ It is dispensed with bulk application equipment
 Bead Open Time‎‎ 60 Second
 Brand‎‎ 3M
 Color‎‎ Tan
 Consumer Label‎‎ No
 Container Volume‎‎ 22 lb.
 Heat Resistance‎‎ 145 Degree Fahrenheit
 Heat Resistance Range‎‎ Low
 Industries‎‎ Automotive,‎ Construction,‎ Furniture,‎ Signage,‎ Consumer Goods,‎ Specialty Vehicle,‎ Transportation,‎ General Industrial,‎ Military & Government,‎ Retail,‎ Electronics,‎ Woodworking,‎ Packaging
 Length‎‎ 0.75 Inch
 Length (Metric)‎‎ 0.01 m
 Open Time Range‎‎ Medium
 Product Form‎‎ Pound
 Size‎‎ Chips
 Solids Weight Percent (Approximate)‎‎ 100 Percent
 Width‎‎ 0.75 Inch
 Width (Metric)‎‎ 19.05 mm