Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Hot Melt Applicator TC, 1 per case

3M ID  62999099351    UPC#  00021200822445     
3M™ Scotch-Weld™ Hot Melt Applicator TC
3M™ Scotch-Weld™ Hot Melt Applicator TC
3M (TM) Scotch-Weld (TM) Hot Melt Adhesive 3762 TC
3M™ Scotch-Weld™ Hot Melt Applicator TC
3M™ Scotch-Weld™ Hot Melt Applicator TC
3M™ Hot Melt Applicator TC is a lightweight, easy to control applicator that dispenses up to 3.5 pounds of adhesive per hour, maintaining a fixed temperature of 385ºF (196ºC). It is designed for use with 5/8" x 2" TC hot melt adhesive sticks.
  • Delivers up to 3.5 pounds of adhesive per hour
  • Maintains a fixed 385° F (196° C) melt temperature
  • Lightweight design provides easy handling
  • On-demand feed control minimizes waste and dripping
  • Adhesive size: 5/8" x 2" TC stick
Need Help?

Questions? We can help

Contact Us

 

Overview

3M™ Hot Melt Applicator TC uses 120V /150W power to maintain a 385°F (196°C ) temperature for consistent, reliable dispensing of 5/8
Choose from a variety of TC hot melt adhesives
Dispenses Up to 3.5 Pounds of Hot Melt Adhesive per Hour
Our 3M™ Hot Melt Applicator TC uses 120V/150W power to maintain a 385°F (196°C ) temperature for consistent, reliable dispensing of 5/8" x 2" TC hot melt adhesives. We built this lightweight applicator (only 10 oz.) for ease of use, with the on demand feed control helping minimize hot melt waste and dripping.

Recommended Applications
  • Small joint assembly
  • Mounting and trim attachment
  • Point-of-purchase displays
  • Trade exhibits
Understanding Hot Melt Applicators
Hot melt adhesive applicators, commonly called "glue guns," are tools used to apply liquefied thermoplastic adhesives and are available in low and high-temperature versions. Low-temperature adhesive applicators operate at approximately 250°F (121°C) and are beneficial when bonding heat sensitive materials such as electronics, plastics, and cloth. High-temperature applicators operate at a minimal temperature of approximately 380°F (193°C) and can dispense adhesives that produce a stronger bond than low-temperature adhesives.

Melted adhesive is extruded through a nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Different nozzles can be used to apply thin, wide strips or narrow, thicker beads. Hot melt adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formulation.

Click here for more information on 3M™ Hot Melt Adhesive Systems (PDF, 1.7 Mb)

Attributes

 Adhesive Size‎‎ 5/8 in x 2 in
 Brand‎‎ 3M
 Consumer Label‎‎ No
 Industries‎‎ Automotive,‎ Construction,‎ Furniture,‎ Signage,‎ Consumer Goods,‎ Specialty Vehicle,‎ Transportation,‎ General Industrial,‎ Military & Government,‎ Retail,‎ Electronics,‎ Woodworking,‎ Packaging
 Operating Temperature‎‎ Hot Melt
 Output (lbs per hour)‎‎ 2.6 - 3.5
 Product Form‎‎ Each
 Solids Weight Percent (Approximate)‎‎ 100 Percent