Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Hot Melt Applicator PG II With Speedloader Cartridge Feed Refurbished, 1 per case

3M ID  62994999316    UPC#  00021200647871    3M Product Number  PG II     
3M™ Scotch-Weld™ PG II Auftragsgerät
3M™ Scotch-Weld™ PG II Auftragsgerät
3M(TM) Scotch-Weld(TM) Hot Melt Applicat PG II Extension Tip
3M (TM) Scotch-Weld (TM) Hot Melt Adhesive 3738 Q
3M (TM) Scotch-Weld (TM) Hot Melt Adhesive 3789 PG
3M™ Scotch-Weld™ Hot Melt Bonding Systems
3M™ Hot Melt Applicator PG II Speedloader Cartridge Feed is a hot melt applicator with pneumatic pressure that can dispense up to 7.5 pounds of adhesive per hour for high volume applications. Three cartridges can be loaded into the Speedloader Cartridge Feed for a continuous flow of hot melt adhesive.
  • Dispenses up to 7.5 pounds of hot melt adhesive per hour
  • Rear cartridge feed provides continuous flow of adhesive
  • Trigger helps improve worker comfort
  • Maintains a fixed 385°F (196°C) melt temperature
  • Designed for use with 1" x 3" PG hot melt adhesive sticks
  • Convenient stand holds applicator in proper standby or hands free position
Need Help?

Questions? We can help

Contact Us

 

Overview

3M™ Hot Melt Applicator PG II Speedloader Cartridge Feed uses 120V AC/500W power to maintain a 385°F (196°C) temperature for consistent, reliable dispensing of 1" x 3" PG hot melt adhesives.
Many hot melts are available for PG II
Dispenses Up to 67.5 Pounds of Hot Melt Adhesive per Hour
Our 3M™ Hot Melt Applicator PG II Speedloader Cartridge Feed uses 120V AC/500W power to maintain a 385°F (196°C) temperature for consistent, reliable dispensing of 1" x 3" PG hot melt adhesives. We built this applicator for ease of control, with the trigger uniquely designed to provide variable flow control. Adhesive flow is also controlled by the type of applicator tip used and pneumatic pressure setting. This gives you flexibility to customize flow and minimize waste. It is designed for use with 1" x 3" PG hot melt adhesive sticks.

Recommended Applications
  • Small joint assembly
  • Large surface lamination
  • Mounting and trim attachment
  • Point-of-purchase displays
  • Trade exhibits
We built this applicator for ease of control, with the trigger uniquely designed to provide variable flow control.
Ideal for small joint, mounting and trim attachment
Rear Cartridge Feed Port Provides Continuous Flow of Adhesive
As the chamber in our 3M™ Hot Melt Applicator PG II (PDF, 1.8 Mb) runs low, it emits a whistling sound. The piston can be retracted and 3 adhesive glue sticks loaded into the chamber to keep production flowing.

Convenient Stand Holds Applicator in Proper Standby
3M™ Hot Melt Applicator PG II Speedloader Cartridge Feed includes a bench stand to hold it in the proper standby position. Stands for hands free operation are also available. Two dispensing tips, 3M™ Hot Melt Applicator Standard Nozzle Tip 9921 and 3M™ Hot Melt Applicator PG II/PG II LT Extension Tip 9946, are included to help deliver 1" x 3" PG hot melt adhesives where you need it.

Adhesive flow is also controlled by the type of applicator tip used and pneumatic pressure setting. This gives you flexibility to customize flow and minimize waste. It is designed for use with 1" x 3" PG hot melt adhesive sticks.
Applicator tip reduces initial adhesive surge
Understanding Hot Melt Applicators
Hot melt adhesive applicators, commonly called "glue guns," are tools used to apply liquefied thermoplastic adhesives and are available in low and high-temperature versions. Low-temperature adhesive applicators operate at approximately 250°F (121°C) and are beneficial when bonding heat sensitive materials such as electronics, plastics, and cloth. High-temperature applicators operate at a minimal temperature of approximately 380°F (193°C) and can dispense adhesives that produce a stronger bond than low-temperature adhesives.

Melted adhesive is extruded through a nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Different nozzles can be used to apply thin, wide strips or narrow, thicker beads. Hot melt adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formulation.

Click here for more information on 3M™ Hot Melt Adhesive Systems (PDF, 1.7 Mb)

Attributes

 Adhesive Size‎‎ 1 in x 3 in
 Brand‎‎ 3M
 Consumer Label‎‎ No
 Industries‎‎ Automotive,‎ Construction,‎ Furniture,‎ Signage,‎ Consumer Goods,‎ Specialty Vehicle,‎ Transportation,‎ General Industrial,‎ Military & Government,‎ Retail,‎ Electronics,‎ Woodworking,‎ Packaging
 Operating Temperature‎‎ Hot Melt
 Output (lbs per hour)‎‎ 5.5 - 7.5
 Product Form‎‎ Each
 Solids Weight Percent (Approximate)‎‎ 100 Percent