3M™ Hot Melt Applicator PG II With Speedloader Cartridge Feed Refurbished, 1 per case
3M ID 62994999316 UPC# 00021200647871 3M Product Number PG II
Many hot melts are available for PG II
Our 3M™ Hot Melt Applicator PG II Speedloader Cartridge Feed uses 120V AC/500W power to maintain a 385°F (196°C) temperature for consistent, reliable dispensing of 1" x 3" PG hot melt adhesives. We built this applicator for ease of control, with the trigger uniquely designed to provide variable flow control. Adhesive flow is also controlled by the type of applicator tip used and pneumatic pressure setting. This gives you flexibility to customize flow and minimize waste. It is designed for use with 1" x 3" PG hot melt adhesive sticks.
Ideal for small joint, mounting and trim attachment
As the chamber in our 3M™ Hot Melt Applicator PG II (PDF, 1.8 Mb) runs low, it emits a whistling sound. The piston can be retracted and 3 adhesive glue sticks loaded into the chamber to keep production flowing.
Convenient Stand Holds Applicator in Proper Standby
3M™ Hot Melt Applicator PG II Speedloader Cartridge Feed includes a bench stand to hold it in the proper standby position. Stands for hands free operation are also available. Two dispensing tips, 3M™ Hot Melt Applicator Standard Nozzle Tip 9921 and 3M™ Hot Melt Applicator PG II/PG II LT Extension Tip 9946, are included to help deliver 1" x 3" PG hot melt adhesives where you need it.
Applicator tip reduces initial adhesive surge
Hot melt adhesive applicators, commonly called "glue guns," are tools used to apply liquefied thermoplastic adhesives and are available in low and high-temperature versions. Low-temperature adhesive applicators operate at approximately 250°F (121°C) and are beneficial when bonding heat sensitive materials such as electronics, plastics, and cloth. High-temperature applicators operate at a minimal temperature of approximately 380°F (193°C) and can dispense adhesives that produce a stronger bond than low-temperature adhesives.
Melted adhesive is extruded through a nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Different nozzles can be used to apply thin, wide strips or narrow, thicker beads. Hot melt adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formulation.
Click here for more information on 3M™ Hot Melt Adhesive Systems (PDF, 1.7 Mb)