Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ Hot Melt Applicator PG II LT with Cartridge Feed, 1 per case

3M ID  62978396307    UPC#  00021200893957    3M Product Number  9783     
3M™ Hot Melt Applicator PGII LT with Speedloader
3M™ Hot Melt Applicator PGII LT with Speedloader
3M™ Hot Melt Applicator PG II LT with Cartridge Feed is our answer to your need for a low temperature, high volume hot melt adhesive applicator. This applicator uses 120V AC /500W power to melt, and pneumatic pressure to drive, up to 6 pounds of adhesive per hour to help keep your high-demand production processes moving. Up to 3 cartridges can be fed through the rear loading port.
  • Rear cartridge feed port provides easy loading and continuous feed
  • Low operating temperature provides adhesive for heat sensitive parts
  • Trigger-control adapts flow to the task at hand
  • Dispenses up to 6 lbs. of adhesive per hour to support high-volume demands
  • Convenient stand holds applicator in proper standby position
Need Help?

Questions? We can help

Contact Us



Whistle While You Work
Reloading is fast and easy. As the chamber runs low, a whistling sound is heard, then the piston can be retracted and up to 3 adhesive sticks loaded into the chamber to keep the adhesive, and production, flowing. Its balanced design is comfortable to operate in multi-station or intermittent manual applications.

Recommended Applications

  • Woodworking
  • Furniture
  • Automotive
  • Transportation
  • Aerospace
  • General Industrial
  • Upholstery
  • Point Of Purchase Display
  • Sample Boards
  • Military
  • Window, Door, Building
  • Trophies
  • Novelties
  • Audio Components
  • Cabinets
  • Construction
  • Packaging
  • Electronics

Trigger Happy Applicator
This applicator is built for ease of control also, with the trigger being uniquely designed to provide variable flow control. Pulling the trigger slowly to the rear will start the adhesive flow. Increased pressure on the trigger increases the flow rate and amount of adhesive dispensed. Adhesive flow is also controlled by the type of applicator tip used and air pressure setting. This gives the operator flexibility to customize flow and minimize waste.

Thermostatically Controlled
A fixed thermostat on the heat block maintains a temperature of 265°F (129°C) for consistent, reliable adhesive flow. The applicator also includes a bench stand to hold it in the proper position when not in use and two tips, 9921 and 9946, to help deliver the adhesive where and how needed. This tool is designed for the reliability to keep processes moving and the simplicity to keep the focus on those processes, a great solution where ever two surfaces need bonding. The applicator is designed exclusively for the low-melt version adhesives and performs best when combined any adhesive in the 3M™ Hot Melt LM Adhesive Stick family.

Hot-melt adhesive applicators, commonly called "glue guns," are tools used to apply liquefied thermoplastic adhesives and are available in low and high-temperature versions. Low-temperature adhesive applicators operate at approximately 250°F (121°C) and are beneficial when bonding heat sensitive materials such as electronics, plastics, and cloth. High-temperature applicators operate at a minimal temperature of approximately 380°F (193°C) and can dispense adhesives that produce a stronger bond than low-temperature adhesives. The applicator creates a flow of adhesive when a solidified adhesive stick is fed into the heat chamber, where it is melted using a fixed-temperature heating element. The molten adhesive is then extruded through a nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Nozzles can be changed to dispense adhesive in a manner that meets a variety of requirements; from a thin, wide strip for carton sealing, to a narrow, thicker bead for bonding wood, composites, or metal. Nozzles are typically metal and become extremely hot during use, which can quickly burn skin. Once dispensed from the applicator, the adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formula. Hot-melt applicators are widely used in industry, crafts, home, and work with materials ranging from paper and lace to wood and metal.


 Adhesive Size‎‎ 1 in x 3 in
 Brand‎‎ 3M
 Industries‎‎ Automotive,‎ Construction,‎ Furniture,‎ Signage,‎ Consumer Goods,‎ Specialty Vehicle,‎ Transportation,‎ General Industrial,‎ Military & Government,‎ Retail,‎ Electronics,‎ Woodworking,‎ Packaging
 Operating Temperature‎‎ Low Melt
 Output (lbs per hour)‎‎ 5.5 - 7.5
 Product Form‎‎ Each
 Solids Weight Percent (Approximate)‎‎ 100 Percent