Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ Hot Melt Applicator Bench Mount PG II, includes required nozzle assembly, 1 per case

3M ID  62927699306    UPC#  00021200822773    3M Product Number  9276     
3M™ Scotch-Weld™ Hot Melt Applicator PGII Bench Mount
3M™ Scotch-Weld™ Hot Melt Applicator PGII Bench Mount
3M™ Hot Melt Applicator PGII LT with Speedloader with benchmount
3M™ Hot Melt Applicator PGII LT with Speedloader with benchmark
We developed the 3M™ Scotch-Weld™ Hot Melt Applicator Bench Mount PG II as a special assembly that optimizes productivity by holding the 3M Scotch-Weld Hot Melt Applicator PG II in a 45º position for hands-free adhesive application. This step saving system allows one worker to concentrate on joining the material while minimizing fatigue from positioning the applicator before and after each step.
  • Provides hands free operation for PG II and PG II LT applicators
  • Adjustable height adapts applicator to many tasks
  • Supports high-volume production environments
  • Eliminates operator fatigue from holding applicator
  • Stable 45° angle ensures precise placement of adhesive
Need Help?

Questions? We can help

Contact Us



It is adjustable to allow positioning of the nozzle tip from a minimum of 9-1/2" to a maximum of 15-1/2" from the bench top and provides an adaptable solution for various task requirements. We also included a nozzle adapter that directs adhesive flow for any compatible nozzle straight down.

What is Hot Melt?
Hot-melt adhesive applicators, commonly called “glue guns,” are tools used to apply liquefied thermoplastic adhesives and are available in low and high-temperature versions. Low-temperature adhesive applicators operate at approximately 250ºF/ 121ºC and are beneficial when bonding heat sensitive materials such as electronics, plastics and cloth. High-temperature applicators operate at a minimal temperature of approximately 380ºF/ 193ºC. The applicator creates a flow of adhesive when a solidified adhesive stick is fed into the heat chamber, where it is melted using a fixed-temperature heating element. The molten adhesive is then extruded through a nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Nozzles can be changed to dispense adhesive in a manner that meets various requirements; from a thin, wide strip for carton sealing, to a narrow, thicker bead for bonding wood, composites or metal. Nozzles are typically metal and become extremely hot during use, which can quickly burn skin. Once dispensed from the applicator, the adhesive generally sets quickly, in most cases just a few seconds. Hot-melt applicators are widely used in industry, crafts, home and work with materials ranging from paper and lace to wood and some metals.


 Brand‎‎ 3M
 Industries‎‎ Automotive,‎ Construction,‎ Furniture,‎ Signage,‎ Consumer Goods,‎ Specialty Vehicle,‎ Transportation,‎ General Industrial,‎ Military & Government,‎ Retail,‎ Electronics,‎ Woodworking,‎ Packaging
 Product Form‎‎ Each
 Solids Weight Percent (Approximate)‎‎ 100 Percent