Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Hot Melt Applicator Bench Mount PG II and PG II LT Nozzle Assembly, 1 per case

3M ID  62923327811    UPC#  00021200217135    3M Product Number  9233     
3M(TM) Scotch-Weld (TM) Hot Melt PGBenchMountII Nozzle Assembly
3M(TM) Scotch-Weld (TM) Hot Melt PGBenchMountII Nozzle Assembly
3M™ Hot Melt Applicator Bench Mount PG II and PG II LT Nozzle Assembly 9233 should be used with the Bench Mount to direct adhesive flow straight down from 3M™ Hot Melt Applicators PG II or PG II LT. Kit includes adapter, valve, standards 0.093" tip and a heat resistant bag.
  • Designed for use with the 3M™ Hot Melt Applicator Bench Mount
  • Nozzle adapter directs adhesive flow straight down from applicator
  • Approved accessory for 3M™ Hot Melt PG II and PG II LT applicators
Ask a 3M Expert
Need Help?

Questions? We can help

Contact Us

 

Overview

 

Directs Adhesive Flow
We designed our 3M™ Hot Melt Applicator Bench Mount PG II and PG II LT Nozzle Assembly 9233 to direct the adhesive flow from our 3M™ Hot Melt PG II and PG II LT Applicators straight down when used in conjunction with the 3M™ Hot Melt Applicator Bench Mount. This ergonomic downward orientation makes hands-free assembly even easier. The kit includes adapter, valve, standards 0.093" tip and a heat resistant bag. The heat resistant bag is designed to shroud the assembly, so there is even heat distribution and protects the user from contacting the hot metal.

Choose original 3M accessories to ensure the accurate performance of 3M™ Hot Melt PG II and PG II LT Applicators for the ideal system for assembly and maintenance.

About Hot Melt Applicators
Hot-melt adhesive applicators, commonly called "glue guns," are tools used to apply liquefied thermoplastic adhesives and are available in low and high-temperature versions. Low-temperature adhesive applicators operate at approximately 250°F (121°C) and are beneficial when bonding heat sensitive materials such as electronics, plastics, and cloth. High-temperature applicators operate at a minimal temperature of approximately 380°F (193°C) and can dispense adhesives that produce a stronger bond than low-temperature adhesives. The applicator creates a flow of adhesive when a solidified adhesive stick is fed into the heat chamber, where it is melted using a fixed-temperature heating element. The molten adhesive is then extruded through a nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick.

Nozzles can be changed to dispense adhesive in a manner that meets a variety of requirements; from a thin, wide strip for carton sealing, to a narrow, thicker bead for bonding wood, composites, or metal. Nozzles are typically metal and become extremely hot during use, which can quickly burn skin. Once dispensed from the applicator, the adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formula. Hot-melt applicators are widely used in industry, crafts, home, and work with materials ranging from paper and lace to wood and metal.

Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.

Learn more about Scotch-Weld™ Hot Melt Bonding Systems (PDF, 2.9 Mb)

Attributes

 Brand‎‎ 3M
 Industries‎‎ Automotive,‎ Construction,‎ Furniture,‎ Signage,‎ Consumer Goods,‎ Specialty Vehicle,‎ Transportation,‎ General Industrial,‎ Military & Government,‎ Retail,‎ Electronics,‎ Woodworking,‎ Packaging
 Product Form‎‎ Each
 Solids Weight Percent (Approximate)‎‎ 100 Percent