Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Epoxy Adhesive DP190 Translucent, 200 mL, 12 per case

3M ID  62328638309    UPC#  00021200878381    Part Number  DP190    3M Product Number  DP190     
3M™ Scotch-Weld™ Epoxy Adhesive DP190 Translucent Duo-Pak
3M™ Scotch-Weld™ Epoxy Adhesive DP190 Translucent Duo-Pak
3M™ Scotch-Weld™ Epoxy Adhesive DP190 is a flexible, translucent, two-part epoxy adhesive. 1:1 mix ratio, 80 minute work life and handling strength in approximately 6 hours. 3M™ Scotch-Weld™ EPX™ 200 mL applicator and mix nozzles are required (not included).
  • 80 minute worklife
  • Low viscosity
  • Flexible bonds
  • General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace
  • Bonding, joining, gluing, attaching, assembling, encapsulating, potting and sealing.
Need Help?

Questions? We can help

Contact Us

 

Overview

3M™ Scotch-Weld™ Epoxy Adhesive DP190 has low viscosity that allows for easy dispensing. Flexible bonds to a variety of materials such as, metals, ceramics, wood and many plastics.

Specifications

ApplicationsBonding Rubber Floor Tiles, Floor Assembly, Hard Disk Drive Component Assembly
BrandScotch-Weld
Chemical BaseEpoxy
ColorTranslucent
Consumer LabelNo
Container Volume200 ml
Full Cure14 Days @ 72 F (22 C)
Hardness35 Shore D
IndustriesGeneral Industrial, Construction, Electronics, Specialty Vehicle, Transportation, Consumer Goods, Military & Government
Mix Ratio Volume Base:Accelerator1 : 01
Peel Strength at 72 Degrees F (22 Degrees C)20 lb/in
Physical FormLiquid
Product FormEach
Shear Strength at 72 Degrees F (22 Degrees C)1200 Pound-Force Per Square Inch
Shelf Life15 Months
Specific Gravity1.08
Storage Temperature72 Degree Fahrenheit
Substrate 1Plastics (ABS, PVC, Acrylic), Rubber (Except EPDM), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Plastics (High Performance Nylon), EPDM Rubber, Wood & Hardboard
Substrate 2Plastics (ABS, PVC, Acrylic), Rubber (Except EPDM), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Plastics (High Performance Nylon), EPDM Rubber, Wood & Hardboard
Time to Handling Strength6 Hour
TypeEpoxy Adhesive
Viscosity Range (cps) at Room Temperature10,000
Worklife80 minutes @ 72 F (22 C)