Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Epoxy Adhesive DP190 Translucent, 400 mL, 6 per case Duo-Pak

3M ID  62328635305    UPC#  00021200878398    Part Number  DP190    3M Product Number  DP190     
3M™ Scotch-Weld™ Epoxy Adhesive DP190 Gray Duo-Pak
3M™ Scotch-Weld™ Epoxy Adhesive DP190 Gray Duo-Pak
3M™ Scotch-Weld™ Epoxy Adhesive DP190 is a flexible, translucent, two-part epoxy adhesive. 1:1 mix ratio, 80 minute work life and handling strength in approximately 6 hours. 3M™ Scotch-Weld™ EPX™ 400 mL applicator and mix nozzles are required (not included).
  • 80 minute worklife
  • Low viscosity
  • Flexible bonds
  • General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace
  • Bonding, joining, gluing, attaching, assembling, encapsulating, potting and sealing.
Need Help?

Questions? We can help

Contact Us

 
3M™ Scotch-Weld™ Epoxy Adhesive DP190 has low viscosity that allows for easy dispensing. Flexible bonds to a variety of materials such as, metals, ceramics, wood and many plastics.

Specifications

Adhesive TypeEpoxy
ApplicationsHard Disk Drive Component Assembly, Bonding Rubber Floor Tiles, Floor Assembly
BrandScotch-Weld
ColorTranslucent
Consumer LabelNo
Container Volume400 ml
Full Cure14 Days @ 72 F (22 C)
Hardness35 Shore D
IndustriesTransportation, Specialty Vehicle, Construction, Military & Government, General Industrial, Electronics, Consumer Goods
Mix Ratio Volume Base:Accelerator1 : 01
Peel Strength at 72 Degrees F (22 Degrees C)20 lb/in
Physical FormLiquid
Product FormEach
Shear Strength at 72 Degrees F (22 Degrees C)1200 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)15
Specific Gravity1.08
Storage Temperature72 Degree Fahrenheit
Substrate 1Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard, Rubber (Except EPDM), EPDM Rubber
Substrate 2Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard, Rubber (Except EPDM), EPDM Rubber
Time to Handling Strength6 Hour
TypeEpoxy Adhesive
Viscosity Range (cps) at Room Temperature10,000
Worklife80 minutes @ 72 F (22 C)