Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Epoxy Adhesive DP125 Translucent, 200 mL, 12 per case Duo-Pak

3M ID  62329138309    UPC#  00021200878428    Part Number  DP125    3M Product Number  DP125     
3M(TM) Scotch-Weld Epoxy Adhesive Dp-125 Gray
3M(TM) Scotch-Weld Epoxy Adhesive Dp-125 Gray
3M™ Scotch-Weld™ Epoxy Adhesive DP125 is a fast setting, very flexible, translucent, two-part epoxy adhesive. 1:1 mix ratio, 25 minute work life and handling strength in approximately 2.5 hours. 3M™ Scotch-Weld™ EPX™ 200 mL applicator and mix nozzles are required (not included).
  • 25 minute worklife
  • High peel and shear strength
  • Medium viscosity
  • General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace
  • Bonding, joining, gluing, attaching, assembling, encapsulating, potting and sealing.
Need Help?

Questions? We can help

Contact Us

 
3M™ Scotch-Weld™ Epoxy Adhesive DP125 is medium viscosity that allows for easy dispensing. Bonds to a variety of materials such as, metals, glass, ceramics, wood and many plastics.

Specifications

Adhesive TypeEpoxy
ApplicationsHard Disk Drive Component Assembly
BrandScotch-Weld
ColorTranslucent
Consumer LabelNo
Container Volume200 ml
Full Cure7 Days @ 72 F (22 C)
Hardness55 Shore D
IndustriesTransportation, Specialty Vehicle, Construction, Military & Government, General Industrial, Electronics, Consumer Goods
Mix Ratio Volume Base:Accelerator1 : 01
Peel Strength at 72 Degrees F (22 Degrees C)35 lb/in
Physical FormFlowable Liquid
Product FormEach
Shear Strength at 72 Degrees F (22 Degrees C)2500 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)15
Specific Gravity1.08
Storage Temperature72 Degree Fahrenheit
Substrate 1Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard, Rubber (Except EPDM), EPDM Rubber
Substrate 2Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard, Rubber (Except EPDM), EPDM Rubber
Time to Handling Strength2.5 Hour
TypeEpoxy Adhesive
Viscosity Range (cps) at Room Temperature15,000
Worklife25 minutes @ 72 F (22 C)