Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Epoxy Adhesive DP105 Clear, 50 mL, 12 per case

3M ID  62328714357    UPC#  00021200872037    Part Number  DP105    3M Product Number  DP105     
3M™ Scotch-Weld™ Epoxy Adhesive DP105 Clear Duo-Pak
3M™ Scotch-Weld™ Epoxy Adhesive DP105 Clear Duo-Pak
3M™ Scotch-Weld™ Epoxy Adhesive DP105 is a clear, colorless, fast setting, flexible, two-part epoxy adhesive. 1:1 mix ratio, 3-5 minute work life and handling strength in approximately 20 minutes. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required (not included).
  • 4 minute worklife
  • Very flexible
  • High peel strength
  • General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace
  • Bonding, joining, gluing, attaching, assembling, encapsulating, potting and sealing.
Need Help?

Questions? We can help

Contact Us

 
3M™ Scotch-Weld™ Epoxy Adhesive DP105 is low viscosity that allows for easy dispensing. Bonds to a wide variety of materials such as, metals, glass, ceramics, wood and many plastics.

Specifications

ApplicationsHard Disk Drive Component Assembly
BrandScotch-Weld
Chemical BaseEpoxy
ColorClear
Consumer LabelNo
Container Volume50 ml
Full Cure48 Hours @ 72 F (22 C)
Hardness45 Shore D
IndustriesGeneral Industrial, Construction, Electronics, Specialty Vehicle, Transportation, Consumer Goods, Military & Government
Mix Ratio Volume Base:Accelerator1 : 01
Peel Strength at 72 Degrees F (22 Degrees C)35 lb/in
Physical FormLiquid
Product FormEach
Shear Strength at 72 Degrees F (22 Degrees C)2000 Pound-Force Per Square Inch
Shelf Life15 Months
Specific Gravity1.13
Storage Temperature72 Degree Fahrenheit
Substrate 1Plastics (ABS, PVC, Acrylic), Rubber (Except EPDM), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Plastics (High Performance Nylon), EPDM Rubber, Wood & Hardboard
Substrate 2Plastics (ABS, PVC, Acrylic), Rubber (Except EPDM), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Plastics (High Performance Nylon), EPDM Rubber, Wood & Hardboard
Time to Handling Strength20 Minute
TypeEpoxy Adhesive
Viscosity Range (cps) at Room Temperature6,500
Worklife4 minutes @ 72 F (22 C)