Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Epoxy Adhesive DP105 Clear, 50 mL, 12 per case

3M ID  62328714357    UPC#  00021200872037    Part Number  DP105    3M Product Number  DP105     
3M™ Scotch-Weld™ Epoxy Adhesive DP105 Clear Duo-Pak
3M™ Scotch-Weld™ Epoxy Adhesive DP105 Clear Duo-Pak
3M™ Scotch-Weld™ Epoxy Adhesive DP105 is a clear, colorless, fast setting, flexible, two-part epoxy adhesive. 1:1 mix ratio, 3-5 minute work life and handling strength in approximately 20 minutes. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required (not included).
  • 4 minute worklife
  • Very flexible
  • High peel strength
  • General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace
  • Bonding, joining, gluing, attaching, assembling, encapsulating, potting and sealing.
Need Help?

Questions? We can help

Contact Us

 
3M™ Scotch-Weld™ Epoxy Adhesive DP105 is low viscosity that allows for easy dispensing. Bonds to a wide variety of materials such as, metals, glass, ceramics, wood and many plastics.

Specifications

Adhesive TypeEpoxy
ApplicationsHard Disk Drive Component Assembly
BrandScotch-Weld
ColorClear
Consumer LabelNo
Container Volume50 ml
Full Cure48 Hours @ 72 F (22 C)
Hardness45 Shore D
IndustriesTransportation, Specialty Vehicle, Construction, Military & Government, General Industrial, Electronics, Consumer Goods
Mix Ratio Volume Base:Accelerator1 : 01
Peel Strength at 72 Degrees F (22 Degrees C)35 lb/in
Physical FormLiquid
Product FormEach
Shear Strength at 72 Degrees F (22 Degrees C)2000 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)15
Specific Gravity1.13
Storage Temperature72 Degree Fahrenheit
Substrate 1Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard, Rubber (Except EPDM), EPDM Rubber
Substrate 2Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard, Rubber (Except EPDM), EPDM Rubber
Time to Handling Strength20 Minute
TypeEpoxy Adhesive
Viscosity Range (cps) at Room Temperature6,500
Worklife4 minutes @ 72 F (22 C)