Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Scotch-Weld™ Epoxy Adhesive 2086 Gray, 5 Gallon, 1 per case

3M ID  62208685255    UPC#  00021200202353    3M Product Number  2086     
3M™ Scotch-Weld™ Epoxy Adhesive 2086 Gray
3M™ Scotch-Weld™ Epoxy Adhesive 2086 Gray
3M™ Scotch-Weld™ Epoxy Adhesive 2086 is an exceptionally high strength heat curing epoxy that provides higher impact, peel and bond strength than normally attainable with epoxy based adhesives. The paste viscosity of this adhesive allows use on vertical surfaces without run-off during the cure cycle.
  • Exceptionally high strength properties at service temperatures from -70ºF to 200ºF (-56ºC to 93ºC)
  • Higher impact, peel, and bond strength properties than normally attainable with epoxy based adhesives
  • Paste viscosity allows the use on vertical surfaces without run-off
  • No volatile by-products given off during cure
  • Easy application by knife coating, trowel, pump and high pressure injection methods
Need Help?

Questions? We can help

Contact Us

 

Overview

High Peel and Shear Strength Maintains Lasting Bond
3M™ Scotch-Weld™ Epoxy Adhesive 2086 provides good adhesion to steel, making it an ideal choice to replace mechanical fasteners, screws, rivets and spot welds. With exceptionally high strength properties at service temperatures from -70°F to 200°F (-56°C to 93°C) and no volatile by-products emitted during cure, this very high viscosity adhesive It can be applied by a spatula, knife coat, notched trowel, or by extruding into place.

Recommended Applications

  • Small joint assembly
  • Heavy-duty mounting assembly
  • Metalworking
  • Carbon fiber epoxy bonding
60 Minute Work Life Provides Time for Positioning and Adjustment
3M™ Scotch-Weld™ Epoxy Adhesive 2086 (PDF, 25 Kb) features a very high viscosity that allows for easy, controlled dispensing that won't drip, sag or migrate on vertical surfaces. It then dries to an off-white color. The mix ratio is 2:1 and provides a 60 minute work life to allow plenty of time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 4 hours and is fully cured in 48 hours.

Understanding Epoxy Adhesives
Epoxy adhesives are part of the class of adhesives called "structural adhesives," which include polyurethane, acrylic, cyanoacrylate and others. One-part heat cured epoxies are rigid adhesives that have outstanding strength when measured at elevated temperatures. These adhesives require a thermal cure, typically around 250°-350°F (120°-180°C) for 40-60 minutes, to achieve full strength. They provide high shear and peel strengths, depending on the formula, and better heat and chemical resistance than other common adhesives.

Epoxy adhesive (often referred to as epoxy glue) is widely used in building and home construction; aircraft and automobile manufacturing; bicycle, boat, golf clubs, ski and snowboard assembly as well as a host of home use and other applications. It is used virtually anywhere high-strength bonds are needed along with resistance to environmental conditions. These adhesives are popular for their ease of use, mechanical strength and chemical resistance. Formulations can be created to make epoxy for plastic flexible or epoxy for metal rigid, epoxy resin transparent or opaque, quick setting or slow setting. The versatility with which these adhesives can be formulated helps meet almost any requirement for bonding wood, metal, glass, stone and various plastics.

Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.

Click here for more information on 3M Structural Adhesives (PDF, 16 Mb)

Attributes

 Adhesive Type‎‎ Epoxy
 Brand‎‎ Scotch-Weld
 Color‎‎ Gray
 Consumer Label‎‎ No
 Full Cure‎‎ 1 Hour @ 350 F (177 C)
 Industries‎‎ Transportation,‎ Specialty Vehicle,‎ Metalworking,‎ Construction,‎ Military & Government,‎ General Industrial,‎ Electronics,‎ Consumer Goods
 Physical Form‎‎ Paste
 Product Form‎‎ Gallon
 Product Type‎‎ Epoxy Adhesive
 Shelf Life in Months (from date of manufacture)‎‎ 15
 Specific Gravity‎‎ 1.44
 Storage Temperature‎‎ 40 Degree Fahrenheit
 Substrate 1‎‎ Metal,‎ Glass & Ceramics
 Substrate 2‎‎ Metal,‎ Glass & Ceramics
 Substrates‎‎ Metal,‎ Glass & Ceramics
 Viscosity Range (cps) at Room Temperature‎‎ Paste
 Volume‎‎ 5 gal