Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ Scotch-Weld™ Acrylic Adhesive 807 Off-White Part A, 5 Gallon, 1 per case

3M ID  62339085300    UPC#  00051115316395    3M Product Number  807     
3M(TM) Scotch-Weld(TM) Adhesive DP807
3M(TM) Scotch-Weld(TM) Adhesive DP807
3M™Scotch-Weld™ Acrylic Adhesive 807 is an acrylic adhesive with high overlap shear and peel strength with good impact resistance and durability. This adhesive bonds well to many metals, woods and most plastic surfaces with minimal surface preparation.
  • High shear and peel strengths ensures a tough, durable, and permanent bond
  • Fast build-up and 5 minute work life sets in under ten minutes at room temperature
  • Ideal for industrial applications by bonding hard-to-adhere substrates with minimal surface preparation, such as most plastics and lightly oily metal
  • Moderate non-sag formula ensure adhesive won't slump or spread excessively
Need Help?

Questions? We can help

Contact Us



Adheres with Minimal Preparation
3M™ Scotch-Weld™ Acrylic Adhesive 807 is able to perform on the most difficult surfaces, even with minimal surface preparation. It offers good shear and peel strength and that makes it ideal for industrial applications where permanent, high-strength bonding of similar and dissimilar surfaces is a requirement. It will effectively bond wood, ceramic, plastic and most metals. Our 3M™ Scotch-Weld™ Acrylic Adhesive 807 offers a non-sag, moderate viscosity formula that won't slump or sag excessively when applied, allowing for precise application while ensuring your adhesive remains directly where you apply it, even on vertical surfaces.

Recommended Applications

  • Joining
  • Bonding
  • Gluing
  • Assembling
  • Sealing

Two Parts, One Common Bond
The mix ratio is 1:1 for quick, precise dispensing, and with a three- to five-minute working time there's some opportunity for repositioning. The adhesive reaches handling strength in approximately 20-minutes and is fully cured in 24 hours (at 72°F/22°C).

Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability, although generally slightly lower than epoxy adhesives. However, they have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life.


 Adhesive Type‎‎ Acrylic
 Brand‎‎ Scotch-Weld
 Color‎‎ Off-White
 Consumer Label‎‎ No
 Container Volume‎‎ 5 Gallon
 Full Cure‎‎ 24 Hours @ 72 F (22 C)
 Hardness‎‎ 70 Shore D
 Industries‎‎ Transportation,‎ Specialty Vehicle,‎ Metalworking,‎ Construction,‎ Signage,‎ General Industrial,‎ Electronics,‎ Consumer Goods
 Mix Ratio Volume Base:Accelerator‎‎ 1 : 1
 Peel Strength at 72 Degrees F (22 Degrees C)‎‎ 20 lb/in
 Physical Form‎‎ Flowable Liquid
 Product Form‎‎ Gallon
 Shear Strength at 72 Degrees F (22 Degrees C)‎‎ 4300 Pound-Force Per Square Inch
 Shelf Life in Months (from date of manufacture)‎‎ 12
 Specific Gravity‎‎ 8.2 Pound Per Gallon (US)
 Storage Temperature‎‎ 72 Degree Fahrenheit
 Substrate 1‎‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard
 Substrate 2‎‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Glass & Ceramics,‎ Wood & Hardboard
 Time to Handling Strength‎‎ 10 Minute
 Type‎‎ Acrylic Adhesive
 Viscosity Range (cps) at Room Temperature‎‎ 35000
 Worklife‎‎ 5 minutes @ 72 F (22 C)