3M™ Outdoor Masking and Stucco Tape 5959 is built strong, holds strong, and removes clean, even up to 90 days after application. Its unique, polyethylene backing, laid over a dense cloth scrim, is strong enough to pull through spatter from stucco, Exterior Insulation and Finishing Systems (EIFS) and other heavy coatings.
Bonds to many surfaces, yet removes cleanly up to 90 days after application
Strong backing pulls through spatter from stucco and Exterior Insulation and Finishing Systems (EIFS) without tearing
High visibility tape is easily identifiable
Cloth-reinforcement is strong yet easy to tear from roll
The adhesive on 3M™ Outdoor Masking and Stucco Tape 5959, a special blend of natural and synthetic rubbers, removes cleanly from most opaque surfaces; making it ideal for construction, marine and other applications such as outdoor masking and stucco projects. Its construction is similar to that of an industrial-strength duct tape, making it useful for sealing, holding, bundling, identifying and protecting while its clean removal stands up to masking in tough coating applications. The smooth, red polyethylene backing is easy to identify and protects underlying surfaces from UV damage and abrasion.
Ideal for overspray protection when masking substrates from coatings such as stucco, EIFS, gel coat and construction coatings
Effective in marine applications where temporary tents are made to contain coating that is being removed or to protect coating being applied from dust and debris
The tough polyethylene outer layer and strong scrim backing make one piece removal of the tape possible when pulling through heavy or extra strong coating
Can be used on surfaces such as window and door frames to protect them from damage during construction
Ideal for critical abatement applications where the surface must not be damaged or marred during the removal process
Thick adhesive layer holds well to irregular surfaces such as sealed masonry or brick
Excellent for temporary repairs and holding on the job
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines and remove easily when finished. Our masking tapes adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.
A masking tape should specify what surfaces it will stick to and the interval over which it will remove cleanly. A very thin or poorly manufactured tape may demonstrate splintering or shredding, either coming off the roll or when being removed after use. Some masking tapes have the tensile strength for light commercial and industrial applications, including bundling, labeling, sealing, temporary repairs, lane marking, splicing and surface protection. The classic crepe paper masking tape is a light tan color, but our masking tapes come in a variety of colors and formulations to meet general and specific applications, such as 3M™ Outdoor Masking and Stucco Tape 5959. A roll of masking tape is basic toolbox or supply room item in any construction, warehousing, military, marine, shipping, and retail industries.
Adhesion to Steel oz/in (N/100 mm)
Tilt - Up Precast Concrete
Polyethylene over cloth scrim
Transportation, Specialty Vehicle, Construction, Automotive, Military & Government