Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ Masking Tape 2307 Tan, 72 mm x 55 m 5.2 mil, 12 per case Bulk

3M ID  70006159555    UPC#  00021200711213    3M Product Number  2307     
3M(TM) Masking Tape 2307
3M(TM) Masking Tape 2307
3M(TM) Industrial Masking Tapes. Masking Made Simple
We developed 3M™ Masking Tape 2307 for general purpose duties like holding, bundling, sealing, general paint masking and other jobs where a pressure sensitive tape is required. The rubber adhesive sticks instantly to most surfaces and offers good holding power to help resist lifting or curling. The crepe paper backing conforms over irregular surfaces and around corners.
  • Easily identifiable, general purpose tape for bundling, holding, identifying and general paint masking
  • Rubber adhesive sticks to most surfaces and removes cleanly in one piece
  • Ideal for easy tear and sliver resistant, along with good paint hold-out that resists bleed-through
  • Crepe-paper backing conforms over irregular surfaces, contours, and around corners
  • Offers controlled unwind - not too easy or too hard
Need Help?

Questions? We can help

Contact Us



Holding Power and Removal the Way You Want
Ideal for easy tear and sliver resistant, the crepe paper backing of 3M™ Masking Tape 2307 also resists bleed through of most paint systems and is useful for bundling and holding. Using a rubber adhesive, our solvent-free tape sticks to most surfaces including metal, rubber, glass, and plastic and removes cleanly in one piece. Tape 2307 has a temperature use range up to 200°F (93°C) for 30 minutes so that sharp paint lines can be created in room temperature or paint-bake operations. This tape is not intended for prolonged outdoor exposure, as it may become very difficult to remove.

3M™ Masking Tape 2307
General purpose masking tapes can be used for critical and non-critical paint masking
Recommended Applications
  • Light duty attaching
  • Bundling parts
  • Labeling and identifying applications
  • General paint masking
3M™ Masking Tape 2307 has been tested and found to meet the requirements of ASTM D 6123 / D 6123M-97.

Ideal for easy tear and sliver resistant, the crepe paper backing of 3M™ Masking Tape 2307 also resists bleed through of most paint systems and is useful for bundling and holding.
With the wide variety of 3M™ Masking Tapes, you can select from a variety of backings, adhesion strengths, clean removal properties and temperature range performance
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Our masking tapes adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.

A masking tape should specify what surfaces it will stick to and the interval over which it will remove cleanly. A very thin or poorly manufactured tape may demonstrate splintering or shredding, either coming off the roll or when being removed after use. Some masking tapes have the tensile strength for light commercial and industrial applications, including bundling, labeling, sealing, temporary repairs, lane marking, splicing, and surface protection. The classic crepe paper masking tape is a light tan color, but our masking tapes come in a variety of colors and formulations to meet general and specific applications. A roll of masking tape is basic toolbox or supply room item in construction, warehousing, military, marine, shipping, and retail industries.

Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.


 Adhesion Strength‎‎ 28 oz/in
 Adhesion Strength (metric)‎‎ 31 N/100mm
 Adhesive Type‎‎ Rubber
 Backing Material‎‎ Crepe Paper
 Brand‎‎ 3M
 Color‎‎ Tan
 Consumer Label‎‎ No
 Elongation‎‎ 8 Percent
 Industries‎‎ Transportation,‎ Specialty Vehicle,‎ Metalworking,‎ Automotive,‎ Furniture,‎ Military & Government,‎ General Industrial,‎ Electronics,‎ Woodworking
 Length‎‎ 60.14 Linear Yard
 Length (Metric)‎‎ 55 m
 Maximum Operating Temperature (Celsius)‎‎ 93 Degree Celsius
 Maximum Operating Temperature (Fahrenheit)‎‎ 200 Degree Fahrenheit
 Product Form‎‎ Roll
 Shelf Life‎‎ 12 months from date of shipment
 Tensile Strength‎‎ 23 lb/in
 Tensile Strength (metric)‎‎ 403 N/100mm
 Thickness‎‎ 5.2 mil
 Thickness (Metric)‎‎ 0.13 mm
 Width‎‎ 2.83 Inch
 Width (Metric)‎‎ 72 mm


Data Sheet