Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ Impact Stripping Tape 500

3M Product Number  500     
3M(TM) Impact Stripping Tape 500
3M(TM) Impact Stripping Tape 500
3M™ Impact Stripping Tape 500 is a green, 33.0 mil (0.80 mm) specially compounded rubber backing with acrylic adhesive and a silicone easy release liner.
  • single liner, 33 mil thickness, green, tan 1.0 mil paper liner
  • good for small lettering, media blasting, edge protection, surface protection
  • Clean cutting, easy alignment, easy blast-through, good adhesion, cuts evenly, clean visible cut marks
Need Help?

Questions? We can help

Contact Us


Product Resultsvar modelsTxt="Product Results";

Narrow by:

Your Selections: 25.4 mm

Products and Purchase Options: 

1 Results (Displaying results 1-1)
3M IDUPCMarketplace Formal NameColorLengthWidth
70006091626000212006089403M™ Impact Stripping Tape 500 Green, 1 in x 10 yd 33.0 mil, 9 per caseGreen10 Linear Yard1 Inch 
1 Results (Displaying results 1-1)
Protects aircraft skins during stripping plastic media blast paint removal operations. Used for removing paint on aircraft by impact stripping and sandblasting wood and glass signs.


Adhesion to Steel oz/in (N/100 mm)25 (27)
Adhesive TypeAcrylic
Backing MaterialRubber
Elongation85 Percent
IndustriesSignage, General Industrial, MRO
Length10 Linear Yard
Length (Metric)9.14 m
Liner TypeEasy Release Film
Product FamilyTape sanding, rubber part
Product FormRoll
Product LineVarious
Shelf Life12 Months
Tensile Strength lb/in (N/100 mm)25 (27)
Total Thickness33 mil
Width30 Inch, 3 Inch, 4 Inch, 6 Inch, 12 Inch, 1 Inch, 2 Inch
Width (Metric)25.4 mm, 101.6 mm, 76.2 mm, 762 mm, 152.4 mm, 304.8 mm, 50.8 mm