Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ Impact Stripping Tape 500

3M Product Number  500     
3M(TM) Impact Stripping Tape 500
3M(TM) Impact Stripping Tape 500
3M(TM) Stripping Tape 500
3M™ Impact Stripping Tape 500 is a green, 33.0 mil (0.80 mm) specially compounded rubber backing with acrylic adhesive and a silicone easy release liner.
  • single liner, 33 mil thickness, green, tan 1.0 mil paper liner
  • good for small lettering, media blasting, edge protection, surface protection
  • Clean cutting, easy alignment, easy blast-through, good adhesion, cuts evenly, clean visible cut marks
Need Help?

Questions? We can help

Contact Us

Protects aircraft skins during stripping plastic media blast paint removal operations. Used for removing paint on aircraft by impact stripping and sandblasting wood and glass signs.


Adhesion to Steel oz/in (N/100 mm)25 (27)
Adhesive TypeAcrylic
Backing MaterialRubber
Elongation85 Percent
IndustriesSignage, General Industrial, MRO
Length10 Linear Yard
Length (Metric)9.14 m
Liner TypeEasy Release Film
Product FamilyTape sanding, rubber part
Product FormRoll
Product LineVarious
Shelf Life12 Months
Tensile Strength lb/in (N/100 mm)25 (27)
Total Thickness33 mil
Width30 Inch, 3 Inch, 4 Inch, 6 Inch, 12 Inch, 1 Inch, 2 Inch
Width (Metric)25.4 mm, 101.6 mm, 76.2 mm, 762 mm, 152.4 mm, 304.8 mm, 50.8 mm