Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Fastbond™ Contact Adhesive 30NF Neutral, 1 gal, 4 per case

3M ID  62427475306    UPC#  00021200211812    3M Product Number  30NF     
3M(TM) Fastbond(TM) Contact Adhesive 30NF
3M(TM) Fastbond(TM) Contact Adhesive 30NF
3M™ Fastbond™ Contact Adhesive 30NF is a low-odor, water-based, adhesive designed to have high strength, high coverage, long bonding range and good heat resistance. This classic adhesive has proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer and canvas.
  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range
  • Adhesive can be applied by spray, brush or roller
  • Non-flammable in its wet state
Need Help?

Questions? We can help

Contact Us

 

Overview

Non-Toxic, Non-Flammable
We designed 3M™ Fastbond™ Contact Adhesive 30NF to create a very strong bond resistant to high heat with a bonding range of up to four hours. It is deal for decorative laminate applications where non-flammability and low VOCs are critical. Post-formable and heat resistant, it is non-flammable in the wet state, which makes in an optimal solution in settings where fire protection is of utmost concern. Commonly used for drywall-laminating or metal-bonding applications, this adhesive is not recommended for novices.

Recommended Applications

  • Most formed plastics
  • Plastic laminate
  • Wood
  • Plywood
  • Wood veneer
  • Canvas
3M™ Fastbond™ Contact Adhesive 30NF
Water Based Adhesives can be applied by rolling or brushing
High Immediate Strength, Long Bonding Range
Formulated to be a fast-acting solution, 3M™ Low Mist Contact Adhesive 30NF delivers high immediate bonding strength with a long bonding range. Our design offers a great solution for bonding porous substrates to porous or non-porous substrates with time for positioning and adjustments. With 3M™ Low Mist Contact Adhesive 30NF, you can leverage the advantages that come from an adhesive that is ready to meet the demands of many tough applications.

Applying Your Adhesive
Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.

Attributes

 Application Method‎‎ Roll,‎ Spray,‎ Brush
 Applications‎‎ Bond Honeycomb Core to Metal,‎ Bond Countertop Laminate to Particle Board
 Brand‎‎ Fastbond
 Color‎‎ Neutral
 Consumer Label‎‎ No
 Environmental Considerations‎‎ Ozone Transport Commission,‎ Helps contribute to LEED® credits,‎ California Air Resources Board,‎ GREENGUARD® Certified
 Flame Retardant‎‎ Non-flammable
 Heat Resistance‎‎ <230 Degree Fahrenheit
 Industries‎‎ General Industrial
 Net Weight‎‎ 1 Gallon
 Open Time‎‎ 30 minutes to 4 hours
 Physical Form‎‎ Thin liquid
 Product Form‎‎ Gallon
 Solids Weight Percent (Approximate)‎‎ 42.4 to 50 Percent
 Specific Gravity‎‎ 1.1
 Substrate 1‎‎ Rigid Foam (Beadboard Styrene),‎ Flexible Foam (Latex, Urethane),‎ Fabric, Felt, Cork & Fibrous Glass,‎ Rigid Foam (Urethane),‎ Leather,‎ Clear Coats,‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Paper & Cardboard,‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Plastics (Flexible Vinyl),‎ Rubber (Except EPDM)
 Substrate 2‎‎ Rigid Foam (Beadboard Styrene),‎ Flexible Foam (Latex, Urethane),‎ Fabric, Felt, Cork & Fibrous Glass,‎ Rigid Foam (Urethane),‎ Leather,‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Paper & Cardboard,‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Plastics (Flexible Vinyl),‎ Rubber (Except EPDM)
 Substrates‎‎ Rigid Foam (Beadboard Styrene),‎ Flexible Foam (Latex, Urethane),‎ Fabric, Felt, Cork & Fibrous Glass,‎ Rigid Foam (Urethane),‎ Leather,‎ Plastics (High Performance Nylon),‎ Plastics (ABS, PVC, Acrylic),‎ Metal,‎ Plastics (Polyolefins and Thermoplastic Elastomers),‎ Paper & Cardboard,‎ Glass & Ceramics,‎ Wood & Hardboard,‎ Plastics (Flexible Vinyl),‎ Rubber (Except EPDM)
 Viscosity Range (cps) at Room Temperature‎‎ 200-750
 Volatile Organic Compounds (VOCs)‎‎ 37 Grams Per Litre
 Volume‎‎ 1 gal