Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

3M™ Double Coated Polyethylene Foam Tape 4466 White, 3/4 in x 36 yd 1/16 in, 12 per case Bulk

3M ID  70006178357    UPC#  00021200243035    3M Product Number  4466     
3M(TM) Double Coated Polyethylene Foam Tape 4466
3M(TM) Double Coated Polyethylene Foam Tape 4466
3M™ Double Coated Polyethylene Foam Tape 4466 is a black or white, closed-cell, polyethylene foam carrier. It is formulated for more hard to bond surfaces. The unique rubber adhesive system provides quick stick and conforms to irregular and low surface energy (LSE) materials.
  • Black or white, 0.062 in. (1.6 mm) closed-cell polyethylene foam carrier
  • High ultimate adhesion to a wide variety of surfaces
  • Conformable tape bonds to irregular surfaces
  • Unique rubber adhesive system provides quick stick
  • Adheres well to most low surface energy (LSE) materials
Need Help?

Questions? We can help

Contact Us

 

Overview

Speed up the mounting process and achieve a more aesthetically pleasing installation with 3M™ Double Coated Polyethylene Foam Tape 4466.
3M Double Coated Polyethylene Foam Tape 4466 is a great choice for general interior and exterior mounting applications
Flexible Foam Tape for Irregular Surfaces
Speed up the mounting process and achieve a more aesthetically pleasing installation with 3M™ Double Coated Polyethylene Foam Tape 4466. This 1/16 in. thick polyethylene foam tape is known for its high ultimate adhesion and reliable performance across many surfaces. One of its noted features is its ability to conform to irregular and low surface energy substrates. It provides high ultimate adhesion to many plastics and is formulated for demanding indoor and general purpose mounting and bonding applications. Common uses include decorative trim, nameplates and other general purpose mounting applications.

Recommended Application
  • Indoor general purpose mounting and joining
  • Decorative trim
  • Nameplate mounting
  • Point-of-purchase displays and signs
Benefits of Double Coated Tape
3M double coated tapes offer speed, strength and improved aesthetics to your mounting application. Instead of mechanical fasteners such as screws, bolts and studs, double coated tapes leave no puncture holes. Our tapes can be easily applied by hand or with a dispenser, with no special application equipment required for a firm bond.

What is Double Coated Tape?
In general, double coated tape is composed of a foam, paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. Applications for double coated tape are found in construction, fabrication, arts, and hobby. For bonding rough or irregular surfaces, 3M™ Double Coated Foam Tapes fill gaps and distribute stress uniformly over the bonded area.

Attributes

 Adhesive Type‎‎ Rubber
 Brand‎‎ 3M
 Carrier Material‎‎ Polyethylene
 Color‎‎ White
 Consumer Label‎‎ No
 Density‎‎ 4 Pound Per Cubic Foot
 Industries‎‎ General Industrial,‎ Electronics
 Length‎‎ 36 Linear Yard
 Length (Metric)‎‎ 32.91 m
 Maximum Operating Temperature (Fahrenheit)‎‎ 120 Degree Fahrenheit
 Primary Liner‎‎ Densified Kraft Paper
 Primary Liner Color‎‎ White
 Product Form‎‎ Roll
 Shelf Life in Months (from date of manufacture)‎‎ 18
 Temperature Resistance - Initial‎‎ 158 Degree Fahrenheit
 Thickness‎‎ 62 mil
 Thickness (Metric)‎‎ 1.5 mm
 Width‎‎ 0.75 Inch
 Width (Metric)‎‎ 19.05 mm

Documents

Brochure

Data Sheet