Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

3M™ Adhesive Transfer Tape 9485PC Clear, 5 mil, Custom Sizes Available

3M ID  70000029770    Part Number  9485PC    3M Product Number  9485PC     
3M(TM) Adhesive Transfer Tape 9485PC Vertical
3M(TM) Adhesive Transfer Tape 9485PC Vertical
3M™ Adhesive Transfer Tape 9485PC is a 5.0 mil, 3M™ High Performance Acrylic Adhesive 350 tape on a 4.2 mil, Tan 58# Polycoated Kraft Paper (PCK) liner. Use this cost-effective tape for joining materials that are relatively smooth, thin and have low residual stress and provides excellent adhesion to plastics and foams.
  • Excellent solvent resistance for reliable performance
  • Acrylic Adhesive 350 provides strong bond to low surface energy materials, powder coated paints
  • Acrylic adhesive "wets out" to maximize surface contact and deliver strong holding power
  • Chemical resistance helps maintain bond strength
  • Ideal bonding solution for general industrial applications
Need Help?

Questions? We can help

Contact Us

The tape gives you high temperature and good chemical resistance along with strong shear strength. By using a 58 lb. polycoated kraft paper release liner, our tape provides reliable performance for industrial applications, such as die-cutting and automated dispensers. The liner also helps reduce edge roll and protects the tape from humidity extremes. 3M(TM) Adhesive Transfer Tapes with 3M(TM) Adhesive 350 are a modified acrylic adhesive ideal for very high-bond strength to many surfaces. They have excellent chemical resistance and bold strength even at elevated temperatures. These tapes are offered with a fiber reinforced adhesive which is important for roll stability in narrow widths. Adhesive 350 is designed for temperature exposure to 450°F (232°C) for short periods of time and up to 300°F (149°C) over long time frames. You will appreciate this adhesive for applications that require adhesion to Low Surface Energy plastics, powder coatings. What is an Adhesive Transfer Tape? In general, 3M(TM) Adhesive Transfer Tapes are rolls of pressure sensitive adhesive pre-applied to a special release liner. The tape consists of adhesive only and does not have any type of backing material. For application the tape is positioned, adhesive side down, to a surface and the liner is removed, exposing the backside of the adhesive to the joining surface. A variety of adhesive properties and liners are available to meet requirements for applications such as nameplate attachment to high and low surface energy plastics, appliance graphic overlays that perform in high temperatures, foam gasketing, web splicing, signs, posters, banners, point-of-purchase displays, and more.


Adhesion to Foam9
Adhesion to HSE10
Adhesion to LSE10
Adhesion to Metal9
Adhesive Peel Initial7
Adhesive Peel Ultimate9
Adhesive Tack LevelHigh
Adhesive TypeAcrylic
Chemical Resistance8
Face-Side Adhesive Thickness5 mil
Face-Side Adhesive Type3M™ High Performance Acrylic Adhesive 350
Humidity ResistanceHigh
IndustriesConverter Solutions, Transportation, Specialty Vehicle, Metalworking, Automotive, Oil and Gas, Medical, Signage, Military & Government, General Industrial, Appliance, Electronics
Master Size Length180 Linear Yard
Master Size Width48 Inch
Meets SpecificationsUL 969, MIL-DTL-19834C, UL 746C
Moisture ResistanceHigh
Plasticizer ResistanceMedium
Primary Liner58# Polycoated Kraft Paper (PCK)
Primary Liner ColorTan
Product FormRoll
Shear Strength at 72 Degrees F (22 Degrees C)High
Temp Resistance-- Lower (deg F)-40 Degree Fahrenheit
Temp Resistance -- Upper (deg F)450 Degree Fahrenheit
Total Thickness9.2 mil
UV ResistanceMedium