Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

Scotch-Brite™ Combi-R Wheel

3M Product Number  CB-ZR     
3M(TM) Combi R Plus Wheels
3M(TM) Combi R Plus Wheels
Scotch-Brite™ Combi-R Wheel is a unique finishing wheel composed of alternating Scotch-Brite™ non-woven flaps and aluminum oxide coated abrasive sheet. Conformable pads provide a large footprint and cushion the abrasive sheet to create a brushed, decorative finish. This wheel uses our Roloc™ Plus quick attachment system.
  • Alternating flaps of coated and non-woven material will cut and finish in a single step
  • 3M™ Roloc™ Plus attachment system uses longer shaft
  • Flexible web pads cushion each abrasive sheet to produce a professional brushed finish
  • Roloc™ attachment holds wheel securely and provides change-out without the need for attachment tools
  • Choice of grades to provide desired finish (#3/#4)
Need Help?

Questions? We can help

Contact Us

 

Product Resultsvar modelsTxt="Product Results";

Narrow by:

Products and Purchase Options: 

3 Results (Displaying results 1-3)
1
3M IDUPCMarketplace Formal NameGrade
FN51007926500051144808007Scotch-Brite™ Combi-R Wheel 80800, 2-1/2 in x 1-1/4 in P180 X-weight, 10 per caseP180   
FN51007931500051144806799Scotch-Brite™ Combi-R Wheel 80679, 2-1/2 in x 1-1/4 in P120 X-weight, 10 per caseP120   
FN51007927300051144808021Scotch-Brite™ Combi-R Wheel 80802, 2-1/2 in x 1-1/4 in 80 X-weight, 10 per case80   
3 Results (Displaying results 1-3)
1
The longer shaft supports the wheel for stability and reduces side-loading, helping it remain perpendicular to the work surface. The Scotch-Brite™ Combi R Wheel is designed for a variety of surface finishing and blending operations on a wide variety of surfaces such as aluminum, stainless steel, copper, and brass. Our Scotch-Brite™ Combi-R Wheel uses aluminum oxide abrasive mineral. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. Our Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

Specifications

Application CategoryFinishing/Polishing, Blending/Deburring
ApplicationsFinishing, Contour Finishing, Fine Finishing, Blending
Attachment TypeRoloc™+
Backing WeightX Weight
BrandScotch-Brite™
ColorMaroon
Converted FormCombi Wheel
Diameter2.5 Inch
Diameter (Metric)63.5 mm
Equipment - MachinesInline Sanders, Bench Motors, Die Grinders
GradeP120, 80, P180
IndustriesMarine, Metalworking
Max RPM9000
Mineral TypeAluminum Oxide
PositionGood
Primary ApplicationMetalworking
Product FormFlap Brush
Sub IndustriesTurbine Engines, Metal Implants, Plumbing Fixtures, Builders Hardware, Medical Instruments, Metal Fabrication
SubstratesAll Metals
Width1.25 Inch
Width (Metric)31.75 mm