Skip to 3M.com Primary Navigation Skip to Site Navigation Skip to Main Content

3M Automotive Aftermarket

Solutions
Products
Promotions
Training & Resources
Support
 

Scratch Refinement

    
Step 2

For fresh and cured clear coats use a spray bottle, apply enough water to dampen the 3M™ Trizact™ abrasive. Sand damp with DA until grade P1500 sand scatches are removed. Surface should appear semi-polished.

Note: When sanding contours, use interface pad.

  • 3M™ Trizact™ Hookit™ II Foam Disc Grade P3000, PN 02075
  • 3M™ Hookit II Soft Interface Pad, PN 05274

  For fresh and cured clear coats use a spray bottle, apply enough water to dampen the 3M™ Trizact™ abrasive. Sand damp with DA until grade P1500 sand scatches are removed. Surface should appear semi-polished.
 

Step 1 | Step 2 | Step 3 | Step 4 |

 

Next Steps >>>

 
For safety always wear goggles, face shield and proper respirator when grinding or sanding. For safety always wear goggles, face shield and proper respirator when grinding or sanding. The Only Dry Sanding System Officially Licensed by NASCAR®. The Only Paint Finishing System Officially Licensed by NASCAR®.