Skip to 3M.com Primary Navigation Skip to Site Navigation Skip to Main Content

3M Automotive Aftermarket

Solutions
Products
Promotions
Training & Resources
Support
 

Machine Glazing

    
Step 3A

To remove swirl marks apply medium pressure.

   To remove swirl marks apply medium pressure. To polish apply light pressure.
Step 3B

To polish apply light pressure. Suggested buffer speed: 1800 RPMs.

  • 3M™ Perfect-It™ Backup Pad, PN 05718 *

    *Use with 3M™ Superbuff™ Adaptor, PN 05710

  • 3M™ Perfect-It™ Foam Polishing Pad, PN 05725

  • 3M™ Perfect-It™ 3000 Swirl Mark Remover

 
 

Step 1 | Step 2 | Step 3 | Step 4 |

 
 

Next Steps >>>

 
For safety always wear goggles, face shield and proper respirator when grinding or sanding. For safety always wear goggles, face shield and proper respirator when grinding or sanding. The Only Dry Sanding System Officially Licensed by NASCAR®. The Only Paint Finishing System Officially Licensed by NASCAR®.