Skip to 3M.com Primary Navigation Skip to Site Navigation Skip to Main Content

3M Automotive Aftermarket

Solutions
Products
Promotions
Training & Resources
Support
 

Sanding

    
Step 1A

To remove nibs, runs, or sags Sand with DA.

  • 3M™ Hookit™ II Finishing Film Discs Grade P1200, PN 00868*

    *Use with 3M™ Hookit™ II Painter's Disc Pad, PN 05286

  Step 1A - Sanding to remove nibs, etc.
 
Step 1B

Scratch refinement and texture matching Sand with DA and interface pad.

  • 3M™ Hookit™ II Soft Interface Pad, PN 05274
  • 3M™ Hookit™ Finishing Film Discs Grade P1200, PN 00868
Optional step: for reduced compounding, use 3M™ Trizact™ Hookit™ II Foam Discs, Grade P3000.

  Step 1B - Scratch refinement
 

Step 1 | Step 2 | Step 3 | Step 4 |

 

Next Steps >>>

 
For safety always wear goggles, face shield and proper respirator when grinding or sanding. For safety always wear goggles, face shield and proper respirator when grinding or sanding. The Only Dry Sanding System Officially Licensed by NASCAR®. The Only Paint Finishing System Officially Licensed by NASCAR®.