Skip to 3M.com Primary Navigation Skip to Site Navigation Skip to Main Content

3M Automotive Aftermarket

Solutions
Products
Promotions
Training & Resources
Support

Step 3

Remove liner from wall dispenser and place in PPS mixing cup.

3M(TM) PPS(TM) Dispenser 3M™ PPS™ - Paint Preparation System Dispensers (PN 16099 and 16019)

   Remove liner from wall dispenser and place in PPS mixing cup.

Step 4

Use the cup with liner to weigh the paint according to paint manufacturer's guidelines or insert 3M™ Mix Ratio Film into the cup before placing liner into the cup.

   Use the cup with liner to weigh the paint according to paint manufacturer's guidelines or insert 3M(TM) Mix Ratio Film into the cup before placing liner into the cup.

Intro | Steps 1-2 | Steps 3-4 | Steps 5-6 | Steps 7-8 | Steps 9-10 | Steps 11-12 | Steps 13-14 | Steps 15-16 |

Spray Gun Adapters | Premixed Paint | Cleaning | Order Info

Next Steps >>>

For safety always wear goggles, face shield and proper respirator when grinding or sanding or spraying. For safety always wear goggles, face shield and proper respirator when grinding or sanding or spraying.