Skip to 3M.com Primary Navigation Skip to Site Navigation Skip to Main Content

3M Automotive Aftermarket

Solutions
Products
Promotions
Training & Resources
Support

Step 13

With the air removed from the liner, the gun may be sprayed upside down or in any direction to reach into difficult areas.

   With the air removed from the liner, the gun may be sprayed upside down or in any direction to reach into difficult areas.

Step 14

Disconnect air line, invert gun and pull trigger (full open, not partial) to return mix to gun cup before disconnecting gun.

   Disconnect air line, invert gun and pull trigger (full open, not partial) to return mix to gun cup before disconnecting gun.

Intro | Steps 1-2 | Steps 3-4 | Steps 5-6 | Steps 7-8 | Steps 9-10 | Steps 11-12 | Steps 13-14 | Steps 15-16 |

Spray Gun Adapters | Premixed Paint | Cleaning | Order Info

Next Steps >>>

For safety always wear goggles, face shield and proper respirator when grinding or sanding or spraying. For safety always wear goggles, face shield and proper respirator when grinding or sanding or spraying.