Perfect for quick repairs and bonds on all types of plastics. Use for:

• Tab and plastic repair
• Bonding emblems
• Bonding glass
• Bonding Molding
• Rebuilding tabs and plastic parts
• Reinforcing back side of minor bumper tears

Designed to assist in applying Duramix™ Products. The plastic sheet can be cut to various shapes and sizes, allowing the applicator to form,shape and protect the adhesive or repair material being used. It is ideal for forming and shaping tabs, applying pressure on the adhesive an applying adhesive in hard-to-reach areas.

Duramix™ urethane products are ideal for repairing light or cosmetic damage on many plastic parts such as urethane, polycarbonate, ABS, fiberglass and other hard plastics. Unlike most cyanolacrylates and epoxies, Duramix urethanes remain pliable and will not crack.

Two-Part flexible epoxy-based product that repairs nicks, gouges, holes and tears in most plastic bumpers an other plastic body panels.

• Easy to use!
• Dries fast! Sandable in 15 minutes for fast cycle time and improved through put
• Exceptional sandability! Sands great with recommended grade 180A
• Use with 3M™ Automix™ Polyolefin Adhesion Promoter PN 05907 to achieve a consistent featheredge
• 3M™ EZ Sand Flexible Parts Repair PN 05895 is an endorsed product of I-CAR
• 3M recommends sanding 3M™ EZ Sand Flexible Parts Repair PN 05895 with a 3M™ Hookit™ II Grade 180 and finish sanding paint edges with 3M™ Hookit™ II Grade 320.

A TPO adhesion promoter applied prior to repair material enhances the bond to polypropylene, polyethylene and EPDM-type plastics. Dries in 5 - 10 minutes.

• Fastest drying
• Designed for spot repairs

• Fills pinholes and scratches
• Good general purpose putty

• Slower drying, provides more working time
• Fills minor low areas and deeper scratches

• Self Leveling, easy to spread
• Flows out to eliminate ridges and squeegee lines
• Easy to sand with minimal shrinkage when dry

• Excellent sandability
• Easiest 3M putty to sand and shape

• Ideal for blending or diluting heavy-bodied body fillers
• Flowable, Brushable

For cleaning a variety of contaminants from surfaces, and to help eliminate the contaminants that can cause "fisheyes" in fresh paint. These 3M cleaners are proven performers.

• A water-based solvent used to remove oil, wax, grease and silicone from surfaces prior to coating
• Effectively cleans metal, primed metal and painted surfaces prior to the application of primer or paint
• Rated at 70 grams per liter of volatile organic compounds (VOC)
• Currently meets regulations governing VOC emissions of surface preparation solvents
• Removes compounds and glazes from door jambs, textured molding, bumpers, etc.

• Specially blended solvent
• Provides easy cleanup of most types of adhesives
• Quickly removes waxes, road tars, grease, oils and similar materials
• Will not harm most thoroughly cured automotive paint, vinyl or fabrics when properly used